ZALM-301-1 Datasheet, PDF (19/19 Pages) California Eastern Labs – APEX LT SERIES TRANSCEIVER MODULES

ZALM-300 Series
REFERENCES & REViSION HISTORY
References
Reference Documents
Apex Module Evaluation Kit User Guide
Ember EM260 Datasheet (June 29, 2007)
Revision History
Previous Versions
0002/3-00-07-00-000
D _{(Issue A) May 7, 2008}
0003-00-07-00-000
E _{(Issue B) January 22, 2009}
0003-00-07-00-000
D _{(Issue C) April 29, 2010}
Changes to Current Version
Initial preliminary datasheet.
Datasheet Unification for ZigBee product line
The following corrections/changes were made: On page 11, the module height
was changed from 0.162” to 0.195”. On page 6, the deep sleep mode current
consumption was changed to 5.0μA.
MEN ^{IGN Disclaimer}
S _{• The information in this document is current as of the published date. The information is subject to change without}
M ^{E notice. For actual design-in, refer to the latest publications of CEL data sheets or data books, etc., for the most}
up-to-date specifications of CEL products. Not all products and/or types are available in every country. Please
check with an CEL sales representative for availability and additional information.
O D • No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of CEL. CEL assumes no responsibility for any errors that may appear in this document.
C _{• CEL does not assume any liability for infringement of patents, copyrights or other intellectual property rights of}
E ^{W third parties by or arising from the use of CEL products listed in this document or any other liability arising from the}
use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other
E ^{intellectual property rights of CEL or others.}
R _{• Descriptions of circuits, software and other related information in this document are provided for illustrative}
N ^{purposes in semiconductor product operation and application examples. The incorporation of these circuits,}
software and information in the design of a customer’s •equipment shall be done under the full responsibility of the
T ^{customer. CEL assumes no responsibility for any losses incurred by customers or third parties arising from the use}
of these circuits, software and information.
O R • While CEL endeavors to enhance the quality, reliability and safety of CEL products, customers agree and
acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to
N ^{O property or injury (including death) to persons arising from defects in CEL products, customers must incorporate}
F ^{sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features.}
Page
N/A
N/A
6, 11