|
CAT25010_07 Datasheet, PDF (1/17 Pages) Catalyst Semiconductor – 1-Kb, 2-Kb and 4-Kb SPI Serial CMOS EEPROM | |||
|
CAT25010, CAT25020, CAT25040
1-Kb, 2-Kb and 4-Kb SPI Serial CMOS EEPROM
FEATURES
 10 MHz SPI compatible
 1.8V to 5.5V supply voltage range
 SPI modes (0,0) & (1,1)
 16-byte page write buffer
 Self-timed write cycle
 Hardware and software protection
 Block write protection
â Protect 1/4, 1/2 or entire EEPROM array
 Low power CMOS technology
 1,000,000 program/erase cycles
 100 year data retention
 Industrial and Extended temperature range
 RoHS-compliant 8-lead PDIP, SOIC, TSSOP and
8-pad TDFN packages
PIN CONFIGURATION
PDIP (L)
SOIC (V)
TSSOP (Y)
TDFN (VP2)
C¯¯S 1
SO 2
¯W¯P¯ 3
VSS 4
8 VCC
7 H¯¯O¯L¯D¯
6 SCK
5 SI
PIN FUNCTION
Pin Name
C¯¯S
SO
¯W¯P¯
VSS
SI
SCK
H¯¯O¯L¯D¯
VCC
Function
Chip Select
Serial Data Output
Write Protect
Ground
Serial Data Input
Serial Clock
Hold Transmission Input
Power Supply
DESCRIPTION
The CAT25010/20/40 are 1-Kb/2-Kb/4-Kb Serial
CMOS EEPROM devices internally organized as
128x8/256x8/512x8 bits. They feature a 16-byte page
write buffer and support the Serial Peripheral Interface
(SPI) protocol. The device is enabled through a Chip
Select (C¯¯S) input. In addition, the required bus signals
are a clock input (SCK), data input (SI) and data
output (SO) lines. The H¯¯O¯L¯D¯ input may be used to
pause any serial communication with the
CAT25010/20/40 device. These devices feature
software and hardware write protection, including
partial as well as full array protection.
FUNCTIONAL SYMBOL
VCC
SI
CS
CAT25010
SO
WP
CAT25020
HOLD
CAT25040
SCK
VSS
For Ordering Information details, see page 16.
© Catalyst Semiconductor, Inc.
1
Characteristics subject to change without notice
Doc. No. MD-1006 Rev. T
|
▷ |