MA1-B-34-615-1A26 Datasheet, PDF (9/24 Pages) Carling Technologies – Circuit Breaker

M-Series Handle/Pushbutton UL Recognized - Ordering Scheme | 9
MM 1
1
Series
2
3
Actuator Poles
1 SERIES
M
2 ACTUATOR¹
Handle
M
Paddle
B
4
Circuit
34
5
Frequency
& Delay
260
6
Current
Rating
N
Baton
Push Button
T
Push-Pull
U
Push To Reset
Push Button w/ Snap-In Mounting
V
Push-Pull
W
Push To Reset
3 POLES
1
One
2
Two
4 CIRCUIT²
without Auxiliary Switch
A
Switch Only (no coil) , Maintained Contacts
B
Series Trip (Current)
with Auxiliary Switch, Silver Contacts
Terminal Type:
M
Series Trip (Current) Aux Switch
.110 QC x .020 QC
P³
Switch Only, Maintained Contacts
.060 Dia, Round Solder Turret
Q^3,4
Switch Only, Maintained Contacts
.058 Dia, Round Q.C.
R^3,13 Switch Only, Maintained Contacts
.080 Dia x .020 Flat Q.C.
S³
Series Trip (Current)
.060 Dia, Round Solder Turret
T^3,4
Series Trip (Current)
.058 Dia, Round Q.C.
U^3,13 Series Trip, Maintained Contacts
.080 Dia x .020 Flat Q.C.
with Auxiliary Switch, Gold Contacts
2^3,4
Switch Only, Maintained Contacts
.058 Dia, Round Q.C.
3^3,13
Switch Only, Maintained Contacts
.080 Dia x .020 Flat Q.C.
4^3,4
Series Trip (Current)
.058 Dia, Round Q.C.
5^3,13
Series Trip, Maintained Contacts
.080 Dia x .020 Flat Q.C.
9
Series Trip (Current) Aux Switch
.110 QC x .020 QC
5 FREQUENCY & DELAY
03
DC 50/60Hz, Switch Only
10
DC Instantaneous
12
DC Short
14
DC Medium
20
50/60Hz Instantaneous
22
50/60Hz Short
24
50/60Hz Medium
30
DC, 50/60Hz Instantaneous
32
DC, 50/60Hz Short
34
DC, 50/60Hz Medium
62
50/60Hz Short, Hi-Inrush
64
50/60Hz Medium, Hi-Inrush
72
DC, Short,Hi-Inrush
74
DC,Medium, Hi-Inrush
92
DC, 50/60Hz Short, Hi-Inrush
94
DC, 50/60Hz Medium,
Hi-Inrush
Notes:
1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W limited
to single pole breakers only.
2 Switch Only circuits are not available with Push-To-Reset actuators. For Switch Only circuits,
select Current Coil Rating from the above chart:
3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch
mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits.
Not available with back connect screw or push-in stud terminals.
4 Mates with AMP .058” diameter pin receptacles including 60983-1 (gold plated)
and 60983-2 (tin plated).
5 Actuator color is only visible in the OFF position on Push-Pull actuators.
6 All units except snap-in mounting have one hex nut installed on bushing for use behind
the panel.
7 Other colors available. Consult factory.
8 TUV and VDE Certification above 15 amps is for 2-pole only and is limited to a max. of
20 amps. Screw Terminal or Push-In Stud recommended above 20 amps.
9 30 amp rating not available with delay’s 30, 32, 34, 92 or 94.
10 Screw Terminals are VDE certified only with use of ring terminal attached to wire.
11 Terminal code A available with circuit codes A & B only.
12 Printed circuit board available with UL recognized approval only.
13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only.
1
7
Terminal
1
8
Actuator
Color
BB
9
10
Front Panel Legend
Hardware Plate
C
11
Bushing
Color
B
12
Agency
Approval
6 CURRENT RATING (AMPERES)⁸
CODE AMPERES
020 0.020
225 0.250
025 0.025
230 0.300
030 0.030
235 0.350
035 0.035
240 0.400
040 0.040
245 0.450
045 0.045
250 0.500
050 0.050
255 0.550
055 0.055
260 0.600
060 0.060
265 0.650
065 0.065
270 0.700
070 0.070
275 0.750
075 0.075
280 0.800
080 0.080
285 0.850
085 0.085
290 0.900
090 0.090
295 0.950
090 0.095
410 1.000
210 0.100
512 1.250
215 0.150
415 1.500
220 0.200
517 1.750
420 2.000
522 2.250
425 2.500
527 2.750
430 3.000
435 3.500
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
620 20.000
622 22.000
624 24.000
625 25.000
630 30.000
7 TERMINAL⁸
1
Push-On 0.250 Tab (Q.C.)
2¹⁰
Screw 8-32 w/upturned lugs
3¹⁰
Screw 8-32 (Bus Type)
A¹¹
Push-In Stud
P¹²
Printed Circuit Board
8 ACTUATOR COLOR & LEGEND⁵
Gloss Handle
Push-Button
1
A
2
B
3
C
4
D
5
E
6
F
8
H
Actuator Color
White
Black
Red
Green
Blue
Yellow
Orange
9 FRONT PANEL HARDWARE⁶
Handle
No outer Panel Hardware
A
Knurled Nut
Bright nickel
B
Bright nickel with locking ring
C
Black
D
Black with locking ring
E
Panel Dress Nut
Bright nickel
F
Bright nickel with locking ring
G
Black
H
Black with locking ring
J
Push-Button
1
2
10 LEGEND PLATE / BUTTON MARKING
Handle Actuator Legend Plate (Actuator Styles M & N)
A
No Legend Plate
B
ON - OFF Vertical
C
ON - OFF Horizontal
D
I - O Vertical
E
I - O Horizontal
Push-Pull Actuator Button Cap (Actuator Styles T & V)
1
No Marking
2
Rated Amps Horizontal
3
Rated Amps Line Side Down
4
Rated Amps Line Side Up
Push-to-Reset Actuator Button (Actuator Styles U& W)
1
No Marking
11 BUSHING COLOR⁷
B
Black
12 AGENCY APPROVAL⁹
C
UL Recognized & CSA Accepted
D
VDE Certified, UL Recognized & CSA Accepted
E
TUV Certified, UL Recognized & CSA Accepted
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [e-mail] • www.carlingtech.com