MA1-B-34-615-1A26 Datasheet, PDF (17/24 Pages) Carling Technologies – Circuit Breaker

M-Series Rocker UL Recognized – Ordering Scheme | 17
M
1
Series
G
2
Actuator
2
3
Poles
1 SERIES
M
B
4
Circuit
34
5
Frequency
& Delay
620
6
Current Rating
2 ACTUATOR¹
Non-Illuminated
single color
A Angled
B Flat
Two Color
Visi-Rocker
D Indicate ON
E Indicate OFF
illuminated
single color
F Angled
G Flat
3 POLES
1
One
2
Two
4 CIRCUIT²
without Auxiliary Switch
A
Switch Only (no coil) , Maintained Contacts
B
Series Trip (Current)
with Auxiliary Switch, Silver Contacts
Terminal Type:
M
Series Trip (Current) Aux Switch
.110 QC x .020 QC
P³
Switch Only, Maintained Contacts
.060 Dia, Round Solder Turret
Q^3,4
Switch Only, Maintained Contacts
.058 Dia, Round Q.C.
R^3,16 Switch Only, Maintained Contacts
.080 Dia x .020 Flat Q.C.
S³
Series Trip (Current)
.060 Dia, Round Solder Turret
T^3,4
Series Trip (Current)
.058 Dia, Round Q.C.
U^3,16 Series Trip, Maintained Contacts
.080 Dia x .020 Flat Q.C.
with Auxiliary Switch, Gold Contacts
2^3,4
Switch Only, Maintained Contacts
.058 Dia, Round Q.C.
3^3,16
Switch Only, Maintained Contacts
.080 Dia x .020 Flat Q.C.
4^3,4
Series Trip (Current)
.058 Dia, Round Q.C.
5^3,16
Series Trip, Maintained Contacts
.080 Dia x .020 Flat Q.C.
9
Series Trip (Current) Aux Switch
.110 QC x .020 QC
5 FREQUENCY & DELAY
03
DC 50/60Hz, Switch Only
10
DC Instantaneous
12
DC Short
14
DC Medium
20
50/60Hz Instantaneous
22
50/60Hz Short
24
50/60Hz Medium
30
DC, 50/60Hz Instantaneous
32
DC, 50/60Hz Short
34
DC, 50/60Hz Medium
62
50/60Hz Short, Hi-Inrush
64
50/60Hz Medium, Hi-Inrush
72
DC, Short,Hi-Inrush
74
DC,Medium, Hi-Inrush
92
DC, 50/60Hz Short, Hi-Inrush
94
DC, 50/60Hz Medium,
Hi-Inrush
Notes:
1 One actuator is located in the center of each multi-pole breaker.
2 For Switch Only circuits, select Current Coil Rating from the above chart:
3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary
Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip & Switch Only
circuits, & is not available in single pole illuminated breakers, or Back Connected Screw or
Push-in Stud terminals.
4 Mates with AMP .058” diameter pin receptacles: 60983-1 (gold plated) & 60983-2
(tin plated).
5 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @
150K, 1/4 WATT, external resistors must be supplied by customer.
6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel.
7 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker
actuator with electrical characteristics: 100 millicandela at 20mA; Maximum power
dissipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage
= 2.1V at 20mA; Typical reverse current = 100uA at 3V. Customer supplies the proper
external resistor limiting current to these values.
8 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or
match color of LED or neon lamp.
9 Other colors available. Consult factory.
10 TUV 20A, VDE 15A. UL Recognized and CSA Accepted to 30 amps.
Screw Terminals or Push-in Stud recommended above 20 amps.
11 TUV or VDE Certified must have I-O or Dual Legends. Legend required on Visi-Rocker
breakers.
12 30 amp rating not available with delay’s 30, 32, 34, 92 or 94.
13 Screw Terminals are VDE certified only with use of ring terminal attached to wire.
14 Terminal code A available with circuit codes A & B only.
15 Printed circuit board available with UL recognized approval only.
16 Auxiliary switch (flat Q.C.) available with UL recognized approvals only.
1
7
Terminal
HC
8
9
Illumination Actuator
Color
6
10
Legend
7
11
Bezel Color
C
12
Agency
Approval
6 CURRENT RATING (AMPERES)
CODE AMPERES
020 0.020
225 0.250
025 0.025
230 0.300
030 0.030
235 0.350
035 0.035
240 0.400
040 0.040
245 0.450
045 0.045
250 0.500
050 0.050
255 0.550
055 0.055
260 0.600
060 0.060
265 0.650
065 0.065
270 0.700
070 0.070
275 0.750
075 0.075
280 0.800
080 0.080
285 0.850
085 0.085
290 0.900
090 0.090
295 0.950
090 0.095
410 1.000
210 0.100
512 1.250
215 0.150
415 1.500
220 0.200
517 1.750
420 2.000
522 2.250
425 2.500
527 2.750
430 3.000
435 3.500
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
620 20.000
622 22.000
624 24.000
625 25.000
630¹² 30.000
7 TERMINAL
1
Push-On 0.250 Tab (Q.C.)
2¹⁰
Screw 8-32 w/upturned lugs
3¹⁰
Screw 8-32 (Bus Type)
A¹⁴
Push-In Stud
P¹⁵
Printed Circuit Board
8 ROCKER ILLUMINATION
Non-illuminated
Neon⁵
without resistor, 120VAC/250VAC
LED^{7, 8}
without resistor
with resistor, 4-8 VDC
with resistor, 9-16 VDC
A
Neon
B
Red
D
E
F
Green Glow⁸
C
Green
G
H
J
Amber
K
L
M
9 ACTUATOR & LEGEND COLOR
Solid Color
Actuator
Legend
1
White
Black
2
Black
White
3
Red
White
4
Green
White
5
Blue
White
6
Yellow
Black
7
Gray
Black
8Visi-Rocker6
Orange
Black
Visi & Legend (remainder of rocker same color as bezel)
1
White
2
Black
3
Red
4
Green
5
Blue
6
Yellow
7
Gray
8Illuminated8
Orange
Actuator
Legend
A
Clear
White
B
Red Transparent
White
C
Green Transparent
White
D
Amber Transparent
White
E
Smoke Gray Transparent
White
F
White Translucent
Black
10 LEGEND¹¹
1
No Legend
2
ON - OFF Vertical
3
ON - OFF Horizontal
4
I - O Vertical
5
I - O Horizontal
6
Dual Vertical
7
Dual Horizontal
11 BEZEL COLOR / STYLE⁹
Color
without Rockerguard
with Rockerguard
White
A 1
Black
B 2
Gray
G 7
12 AGENCY APPROVAL¹⁰
C
UL Recognized & CSA Accepted
D
VDE Certified, UL Recognized & CSA Accepted
E
TUV Certified, UL Recognized & CSA Accepted
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [e-mail] • www.carlingtech.com