|
GA1-B0-24-620-11-DC Datasheet, PDF (1/4 Pages) Carling Technologies – Circuit Breaker | |||
|
G-Series
Circuit Breaker
Carling Technologiesâ G-Series hydraulic/magnetic
circuit breakers offer the highest quality solution to
your circuit protection requirements. The G-Series is
designed to sense over-current conditions and protect
an electrical systemâs wires and equipment. When left
unchecked over-current conditions will result in fires and
costly damage. Hydraulic/magnetic circuit breakers are
considered to be temperature stable and not adversely
affected by temperature changes in their operating
environment. As such, de-rating considerations due
to temperature variations are not required, and heat-
induced nuisance tripping is avoided.
Key Features:
ÂÂ 1-4 poles
ÂÂ 0.02 - 63 Amps
ÂÂ 80 VDC, 240 VAC, 480 VAC
ÂÂ Mid-trip actuator indication
ÂÂ Precise temperature independent operation
ÂÂ Wiping contacts â mechanical linkage with two-step
ÂÂ actuation â cleans contacts and ensures longer
contact life
ÂÂ Wide choice of trip time delay curves
ÂÂ Optional integrated auxiliary contacts
ÂÂ Unique terminal bus connection system
ÂÂ DIN rail mounting
ÂÂ Finger safe terminals
ÂÂ Suitable for reverse feed
ÂÂ Common trip linkage between poles â ensures that an
overload in one pole will trip all adjacent poles
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
Carling Technologies, Inc.
60 Johnson Avenue ⢠Plainville, CT 06062-1177
Phone: (860) 793-9281 ⢠Fax: (860) 793-9231
Email: sales@carlingtech.com ⢠www.carlingtech.com
|
▷ |