CM2030 Datasheet, PDF (10/14 Pages) California Micro Devices Corp – HDMI Transmitter Port Protection and Interface Device

CM2030
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE 1)}
ΔC_IN, TMDS
TMDS Channel Input
5V_SUPPLY=5.0V, Measured at
0.05
pF
Capacitance Matching
1MHz, V_BIAS=2.5V; Notes 2 and 5
C_MUTUAL
Mutual Capacitance
5V_SUPPLY=0V, Measured at
between signal pin and adja­ 1MHz, V_BIAS=2.5V; Note 2
cent signal pin
0.07
pF
C_IN, DDC_OUT
Level Shifting Input Capaci­
tance, Capacitance to GND
5V_SUPPLY=0V,
Measured at 100KHz,
V_BIAS=2.5V; Note 2
10
pF
C_IN, CEC_OUT
Level Shifting Input Capaci­
tance, Capacitance to GND
5V_SUPPLY=0V,
Measured at 100KHz,
V_BIAS=1.65V; Note 2
10
pF
C_IN, HP_OUT
Level Shifting Input Capaci­
tance, Capacitance to GND
5V_SUPPLY=0V,
Measured at 100KHz,
V_BIAS=2.5V; Note 2
10
pF
Note 1: Operating Characteristics are over Standard Operating Conditions unless otherwise specified.
Note 2: This parameter is guaranteed by design and verified by device characterization.
Note 3: Standard IEC61000-4-2, C_DISCHARGE=150pF, R_DISCHARGE=330Ω, 5V_SUPPLY=5V, 3.3V_SUPPLY=3.3V,
LV_SUPPLY=3.3V, GND=0V.
Note 4: Human Body Model per MIL-STD-883, Method 3015, C_DISCHARGE=100pF, R_DISCHARGE=1.5kΩ, 5V_SUPPLY=5V,
3.3V_SUPPLY=3.3V, LV_SUPPLY=3.3V, GND=0V.
Note 5: Intra-pair matching, each TMDS pair (i.e. D+, D–)
Note 6: These measurements performed with no external capacitor on V_P (V_P floating)
Note 7: These static measurements do not include AC activity on controlled I/O lines
© 2007 California Micro Devices Corp. All rights reserved.
10
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ●Tel: [phone] ●Fax: [phone] ●www.cmd.com
Issue A – 11/16/07