CM3131 Datasheet, PDF (1/10 Pages) California Micro Devices Corp – Triple Linear Voltage Regulator for DDR-I/-II Memory

CM3131
Triple Linear Voltage Regulator for DDR-I/-II Memory
Features
• Integrated power solution for DDR-I and DDR-II
memory systems with few external components
• Three all-linear regulators for V_DDQ, V_TT and
V_STBY power supply applications
• Lowest system cost and smallest footprint for
DDR power solutions
• V_DDQ regulator/driver utilizes external N-FET to
provide up to 15A current at 2.5V/1.8V
• V_TT source/sink regulator provides up to 2A at
1.25V for DDR-I systems or 0.65A at 0.9V for
the DDR-II memory controller (not DDR-II
memory)
• LDO standby regulator provides up to 500mA at
2.5V for DDR-I and at 1.8V for DDR-II systems
• Can be ganged for higher current applications
• Over temperature and reverse current protection
• Over current protection for V_STBY and V_TT
regulator
• Available in 8 lead and 14 lead PSOP packages
• Lead-free versions available
Applications
• Desktop PCs, notebooks, and workstations
• Set top boxes, digital TVs, printers
• Embedded systems
Product Description
The CM3131 family of all-linear regulators provides
an integrated power solution for DDR-I/-II memory
systems in both run-time and standby modes of
operation. The CM3131 is ideal for designs
incorporating both a main 3.3V and a standby (3.3V
or 5V) supply. The CM3131 features three
independent linear regulators for V_DDQ, V_TT and V_STBY
supply regulation and will maintain an accuracy of
±1% across the operating temperature range.
The CM3131 is offered in two configurations. The
CM3131-01/11 drives a single external N-FET on a
single V_DDQ rail. The CM3131-02 drives two external
unmatched N-FETs on two V_DDQ rails. Each V_DDQ rail
incorporates an adjustment pin (SENSE) to enable
setting V_DDQ in the 2.2V to 2.8V range, supporting
DIMMs with different supply requirements or DDR-II
type devices.
The CM3131-01/11 is available in 8-lead PSOP
package and the CM3131-02 is available in 14-lead
PSOP package.
The CM3131 devices are also available with optional
lead-free finishing.
Electrical Schematic
© 2004 California Micro Devices Corp. All rights reserved.
02/02/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: [phone] Fax: [phone]
www.calmicro.com
1