BUF12800 Datasheet, PDF (2/20 Pages) Burr-Brown (TI) – REFERENCE VOLTAGE GENERATOR for LCD GAMMA CORRECTION

BUF12800
SBOS315 − DECEMBER 2004
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +20V
Supply Voltage, VSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6V
Signal Input Terminals, SCL, SDA, AO, LD:
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5V to +6V
Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10mA
Output Short-Circuit(2) . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . −40°C to +95°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . −65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . . . . . . +300°C
ESD Rating:
Human Body Model (HBM) . . . . . . . . . . . . . . . . . . . . . . . 4000V
Charged Device Model (CDM) . . . . . . . . . . . . . . . . . . . . 1000V
Machine Model (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V
(1) _{Stresses above these ratings may cause permanent damage.}
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not supported.
(2) _{Short-circuit to ground, one amplifier per package.}
www.ti.com
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
ORDERING INFORMATION⁽¹⁾
PRODUCT PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
BUF12800
TSSOP-24
PWP
−40°C to +85°C
BUF12800
BUF12800AIPWP
Tube, 60
BUF12800AIPWPR Tape and Reel, 2000
(1) _{For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.}
PIN CONFIGURATION
Top View
TSSOP
V_S 1
V_S 2
REFH 3
V_SD 4
SCL 5
SDA 6
A0 7
LD 8
GND_D(1) 9
REFL 10
GND_A(1) 11
GND_A(1) 12
PowerPAD
Lead−Frame
Die Pad
Exposed on
Underside
24 Out L
23 Out K
22 Out J
21 Out I
20 Out H
19 Out G
18 Out F
17 Out E
16 Out D
15 Out C
14 Out B
13 Out A
(1) _{GNDD and GNDA are internally connected and must be at the same voltage potential.}
2