SA72SB0 Datasheet, PDF (5/7 Pages) Bourns Electronic Solutions – Breaker (Surface Mount Thermal Cutoff Device)

SA Series Breaker (Surface Mount Thermal Cutoff Device)
Typical Part Marking
SA
SERIES DESIGNATOR
MANUFACTURER’S
INTERNAL CODE
(ALPHANUMERIC CHARACTER)
9016L
DATE CODE:
MONTH (1~9, X, Y, Z)
DATE
YEAR
MACHINE NO.
ROMAN NUMERAL (I, II, III, ETC.) or
ARABIC NUMERAL (1, 2, 3, ETC.) = OKAYAMA FACTORY
ALPHABET = SHIGA FACTORY
11
77SB0
TERMINAL TYPE
(0 = 4 TERMINALS, 1.3 mm LENGTH)
RESIN TYPE
ARM MATERIAL
S = Cu ALLOY HIGH CURRENT TYPE)
TRIP TEMPERATURE - °C
(72, 77, 82, 85)
Application Temperature Range
........................................... -30 ~ 100 °C
Storage Conditions
1) .The breaker must be stored in the standard packaging with the following conditions:
ambient temperature of -10 to +40 °C, RH <75 % with no radical temperature
change, direct sunshine, excessive vibration or shock.
2) .Avoid storage locations where there is a possibility of generating corrosive gas
.such as from salt breeze, chlorine, hudrogen sulfide, ammonium, sulfide-oxidation,
hydrogen chloride, acetate, etc.
3) Storage period should be no longer than 24 months from date of shipment.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.