SA72SB0 Datasheet, PDF (4/7 Pages) Bourns Electronic Solutions – Breaker (Surface Mount Thermal Cutoff Device)

SA Series Breaker (Surface Mount Thermal Cutoff Device)
Standard Packaging Specifications
Reel (13 inch)...................................................................................................................................................................5,000 pcs. (fixed)
Outer Box (690 mm x 344 mm x 136 mm).....................................................................................................................50,000 pcs. (fixed)
Marking...........................................A label will be attached on the reel and outer box which includes the following items, at a minimum:
Part name, part number, quantity, lot number, safety approval mark (UL, etc.),
company name (Bourns KK) and any other items required by the customer
REEL
10.0
(.394)
DIA.
90.0
(3.543)
DIA.
2.0
(.079)
2.8
(.110)
2.0
(.079)
330.0 ± 2.0
(12.992 ± .079)
DIA.
13.0 ± 0.2
(.512 ± .008)
R
5.0
(.197)
CARRIER TAPE
8.00 ± 0.1
DIA. ^{(.315 ± .004)}
1.50 +0.1/-0
(.059 +.004/-.000)
80.0 ± 1.0
(3.150 ± .039)
DIA.
2.0 ± 0.5
(.079 ± .020)
13.0 ± 0.2
(.512 ± .008)
DIA.
35 °
21.0 ± 0.8
(.827 ± .031)
DIA.
CENTER HOLE
ENLARGEMENT
1.0 _R
(.039)
17.5 ± 1.0
(.689 ± .039)
21.5 ± 1.0
(.846 ± .039)
2.00 ± 0.1
(.079 ± .004)
4.00 ± 0.1
(.157 ± .004)
1.75 ± 0.1
(.069 ± .004)
7.50 ± 0.1
(.295 ± .004)
5.65
(.222) ^{5 °}
3.75 ± 0.1
5°
(.148 ± .004)
16.00 +0.3/-0.1
(.630 +.012/-.004)
8.45 ± 0.1
(.333 ± .004)
1.30 ± 0.1
(.051 ± .004)
NOTES:
1) The corner and ridge radiuses (R) of inside cavity
are 0.3 mm / (.012 in.) max.
2) Cumulative tolerance of 10 pitches of the sprocket
hole is ±0.2 mm / .008 in.).
3) Measuring of cavity positioning is based on cavity
center in addordance with JS/IES standard.
0.30 ± 0.05
(.012 ± .002)
1.50
(.059)
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.