HCPL-1930 Datasheet, PDF (5/13 Pages) Agilent(Hewlett-Packard) – Dual Channel Line Receiver Dual Channel Line Receiver Dual Channel Line Receiver

HCPL-1930, HCPL-1931, HCPL-193K, 5962-89572
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Solder Temperature
Forward Input Current (each channel)
Reverse Input Current
Supply Voltage (1 minute max)
Enable Input Voltage (each channel)
Output Collector Current (each channel)
Output Collector Power Dissipation (each channel)
Output Collector Voltage (each channel)
Total Package Power Dissipation
Input Power Dissipation (each channel)
a. Derate linearly at 1.2 mA/°C above T_A = 100°C.
b. Not to exceed V_CC by more than 500 mV.
Schematic
Data Sheet
Symbol
Min
Max
Unit
Note
T_S
–65
+150
°C
T_A
–55
+125
°C
—
260 for 10 sec
°C
I_I
—
I_R
—
V_CC
—
V_E
—
I_O
—
P_O
—
V_O
—
—
60
mA
a
60
mA
7.0
V
5.5^b
V
25
mA
40
mW
7
V
564
mW
—
168
mW
Notes: The connection of a 0.1-μF bypass capacitor between pins 15 and 10 is recommended. Bypassing of the power supply line is required, with a 0.1-μF ceramic
disc capacitor adjacent to each isolator. The power supply bus for the isolators should be separate from the bus for any active loads, otherwise additional
bypass capacitance may be needed to suppress regenerative feedback via the power supply.
ESD Classification
(MIL-STD-883, Method 3015)
, Class 1
Broadcom
-5-