English
Language : 

SLIN-30E1AX Datasheet, PDF (3/26 Pages) Bel Fuse Inc. – 6.0 Vdc - 14 Vdc Input, 0.8 Vdc - 2.75 Vdc /30 A Outputs
NON-ISOLATED DC/DC CONVERTERS
6.0 Vdc - 14 Vdc Input, 0.8 Vdc - 2.75 Vdc /30 A Outputs
Jan. 11, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Output Specifications
Parameter
Min
Output Voltage Set Point
-1.5
Output Voltage
-3.0
Adjustment Range
0.8
Remote Sense Range
-
Load Regulation
-
Line Regulation
-
Temperature Regulation
(-40°C to 85°C)
-
Ripple and Noise (pk-pk)
-
Output Current Range
0
Output DC Current Limit
-
Output Short-Circuit Current
-
Output Capacitance
ESR≥ 1 mΩ
0
ESR≥0.15 mΩ
0
ESR≥ 10 mΩ
0
-
Turn-On Delay Time
-
Output voltage Rise time
2
Output voltage overshoot
-
Typ Max
Unit
Notes
-
+1.5 %Vo,set VIN=VIN,nom, IO=IO, nom
-
+3.0
%Vo,set
Over all operating input voltage, resistive load,
and temperature conditions until end of life
-
2.75
V
selected by an external resistor
-
0.5
V
-
10
mV
IO=IO, min to IO, max
-
10
mV
VIN=VIN, min to VIN, max
0.5
1
%Vo,set Tref=TA, min to TA, max
-
50
mV
5Hz to 20MHz BW, VIN=VIN, nom and IO=IO, min to
IO, max, Co = 0.1μF // 47 μF ceramic capacitors
-
30
A
140
-
%Io,max Hiccup Mode
3.5
-
A
Vo≤250mV, Hiccup Mode
-
200
uF
Without the Tunable LoopTM
-
1000
uF
With the Tunable LoopTM
-
10000
uF
With the Tunable LoopTM
2.5
5
2.5
5
Case 1: On/Off input is enabled and then input
mS power is applied (delay from instant at which
VIN = VIN, min until Vo =10% of Vo, set)
Case 2: Input power is applied for at least one
mS
second and then the On/Off input is enabled
(delay from instant at which Von/Off is enabled
until Vo =10% of Vo, set)
-
10
mS
time for Vo to rise from 10% of Vo, set to 90%
of Vo, set
-
3
%Vo,set
Vin=Vin, min to Vin, max, Io=Io, max, With or without
maximum external capacitance
Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and
temperature conditions.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
3