C0240QGLA-T Datasheet, PDF (19/23 Pages) AZ Displays – Approval Product Specification

RESETB
MVDD
VREG1OUT
VCI
VGH
VGL
GND
Document No.:
I
Reset pin initializes the IC when low. Should be reset after
power-on.
O
Internal power for RAM. Connect a capacitance to gnd. Connect a
capacitance (1u/10v) to gnd.
O
A reference level for the grayscale voltage. Connect a capacitance
(1u/10v) to gnd.
I Power supply for analog circuit (2.5v~3.3v)
O
The positive voltage used in the gate driver. Connect a capacitance
(1u/10v) to gnd.
O
The negative voltage used in the gate driver. Connect a capacitance
(1u/10v) to gnd.
Ground
19