L06036R8CGSTR Datasheet, PDF (4/5 Pages) AVX Corporation – SMD High-Q RF Inductor

Accu-L^® 0603 and 0805
SMD High-Q RF Inductor
FINAL QUALITY INSPECTION
Finished parts are tested for electrical parameters and visual/
mechanical characteristics.
Parts are 100% tested for inductance at 450MHz. Parts are
100% tested for R_DC. Each production lot is evaluated on a
sample basis for:
• Q at test frequency
• Static Humidity Resistance: 85°C, 85% RH, 160 hours
• Endurance: 125°C, I_R, 4 hours
2
ENVIRONMENTAL CHARACTERISTICS
TEST
Solderability
Leach Resistance
Storage
Shear
Rapid Change of
Temperature
Bend Strength
CONDITIONS
Components completely immersed in
a solder bath at 235 ± 5°C for 2 secs.
Components completely immersed in
a solder bath at 260 ±5°C for 60 secs.
12 months minimum with components
stored in “as received” packaging.
Components mounted to a substrate.
A force of 5N applied normal to the
line joining the terminations and in
a line parallel to the substrate.
Components mounted to a substrate.
5 cycles -55°C to +125°C.
Tested as shown in diagram
1mm
deflection
45mm
45mm
REQUIREMENT
Terminations to be well tinned.
No visible damage.
Dissolution of termination faces
≤ 15% of area.
Dissolution of termination edges
≤ 25% of length.
Good solderability
No visible damage
No visible damage
No visible damage
Temperature
Coefficient of
Inductance
(TCL)
Component placed in
environmental chamber
-55°C to +125°C.
+0 to +125 ppm/°C
(typical)
TCL =
T₁ = 25°C
L₂-L₁
L₁ (T₂-T₁)
• 10⁶
31