HCPL-4504-500E Datasheet, PDF (9/19 Pages) AVAGO TECHNOLOGIES LIMITED – High CMR, High Speed Optocouplers

IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics
Description
Installation classification per
DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤150 V rms
for rated mains voltage ≤300 V rms
for rated mains voltage ≤450 V rms
for rated mains voltage ≤600 V rms
for rated mains voltage ≤1000 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
V_IORM x 1.875 = V_PR, 100% Production
Test with t_m = 1 sec,
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a*
V_IORM x 1.5 = V_PR, Type and Sample
Test, t_m = 60 sec,
Partial Discharge < 5 pC
Highest Allowable Overvoltage*
(Transient Overvoltage, t_ini = 10 sec)
Safety Limiting Values - Maximum
Values Allowed in the Event of a Failure,
also see Thermal Derating curve
Case Temperature
Input Current
Output Power
Insulation Resistance at T_S,
V_IO = 500 V
Symbol
V_IORM
V_PR
V_PR
V_IOTM
T_S
I_S,INPUT
P_S,OUTPUT
R_S
HCPL-0454
OPTION 060
I-IV
I-III
55/100/21
2
560
1050
840
4000
150
150
600
≥10⁹
HCPL-4504
OPTION 060
I-IV
I-IV
I-III
55/100/21
2
630
1181
945
6000
175
230
600
≥10⁹
HCPL-J454
I-IV
I-IV
I-III
I-III
55/100/21
2
891
1670
1336
6000
175
400
600
≥10⁹
HCNW4504
I-IV
I-IV
I-IV
I-IV
I-III
55/85/21
2
1414
2652
2121
8000
150
400
700
≥10⁹
Unit
V _peak
V _peak
V _peak
V _peak
°C
mA
mW
Ω
*Refer to the optocoupler section of the Designer's Catalog, under regulatory information (IEC/EN/DIN EN 60747-5-2) for a detailed description of
Method a and Method b partial discharge test profiles.
NOTE: These optocouplers are suitable for "safe electrical isolation" only within the safety limit data. Maintenance of the safety data shall be ensured
by means of protective circuits.
NOTE: Insulation Characteristics are per IEC/EN/DIN EN 60747-5-2.
NOTE: Surface mount classification is Class A in accordance with CECC 00802.
9