ACCL-9410 Datasheet, PDF (9/9 Pages) AVAGO TECHNOLOGIES LIMITED – Output enable function

Bypassing and PC Board Layout
The ACCL-9410 digital isolator is easy to use. No external interface circuitry is required because its high speed CMOS IC technology
allows CMOS logic to be connected directly to the inputs and outputs. As shown in Figure 9, the external components required for
proper operation are two bypass capacitors for decoupling the power supply. Capacitor values should be 0.1 μF and the capacitor
be placed as close as possible to the isolator. The total lead length between both capacitor ends and the power supply pins is not
more than 20 mm.
Figure 9 Typical Schematic of ACCL-9410 on PC Board
VDD ₁
1
0.1 μF
2
GND1
V_IA
3
16 ^{VDD 2}
0.1 μF
15
GND₂
14
V_OA
V_IB
4
13
V_OB
V_IC
5
V_OD
6
V_E1 7
8
GND₁
12
V_OC
11
V_ID
10 ^VE2
9
GND₂
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago Technologies and the A logo are trademarks of Avago Technologies in the United
States and other countries. All other brand and product names may be trademarks of their
respective companies.
Data subject to change. Copyright © 2015-2016 Avago Technologies. All Rights Reserved.
pub-005306 – January 27, 2016