ACCL-9410 Datasheet, PDF (7/9 Pages) AVAGO TECHNOLOGIES LIMITED – Output enable function

ACCL-9410
Data Sheet
Package Characteristics
Package Characteristics
All typical at T_A = 25 °C
Parameter
Input-Output Insulation ^[5]
Input-Output Resistance
Input-Output Capacitance
Package Power Dissipation
Symbol
Min.
Typ.
Max.
Units
Test Conditions
V_ISO
1500
Vrms RH < 50% for 1 min. T_A = 25 °C
R_I-O
10¹⁵
V_I-O = 500 V
C_I-O
1.6
pF
f=1 MHz, T_A = 25 °C
P_PD
155
mW
Notes:
1. I_DD1(0) is the supply current consumption at V_DD1 when there is no signal to all inputs.
2. I_DD1(F) is the supply current consumption at V_DD1 when inputs are switching at the specified data rate, and outputs are switching at same data rate with no load.
3. I_DD2(0) is the supply current consumption at V_DD2 when there is no signal to all inputs.
4. I_DD2(F) is the supply current consumption at V_DD2 when inputs are switching at the specified data rate, and outputs are switching at same data rate with no load.
5. In accordance with UL 1577, each isolator is proof tested by applying an insulation test voltage ≥ 1800 Vrms for 1 second (leakage detection current limit,
I_I-O ≤ 5 A).
Performance
Figure 1 Typical I_DD1(0) vs Temperature
3.5
3.0
VDD=3.3V
VDD=5.0V
2.5
2.0
-50 -25
0 25 50 75 100 125
Temperature, C
Figure 2 Typical I_DD1(25) vs Temperature
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
-50 -25
0 25 50
Temperature, C
VDD=3.3V
VDD=5.0V
75 100 125
Avago Technologies
-7-