HCPL-063A-000E Datasheet, PDF (6/17 Pages) AVAGO TECHNOLOGIES LIMITED – HCMOS Compatible, High CMR, 10 MBd Optocouplers

Insulation and Safety Related Specifications


Parameter
Symbol
8-Pin DIP
(300 Mil)
Value
SO-8
Value Units
Minimum External Air
L(101)
7.1
4.9 mm
Gap (External
Clearance)
Minimum External
L(102)
7.4
4.8 mm
Tracking (External
Creepage)
Minimum Internal Plastic
0.08
0.08 mm
Gap (Internal Clearance)



Tracking Resistance
(Comparative Tracking
Index)
CTI
200
200 Volts
Isolation Group
IIIa
IIIa

Conditions
Measured from input terminals to
output terminals, shortest distance
through air.
Measured from input terminals to
output terminals, shortest distance
path along body.
Through insulation distance, conductor
to conductor, usually the direct
distance between the photoemitter and
photodetector inside the optocoupler
cavity.
DIN IEC 112/ VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89,
Table 1)
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*
Description
Symbol
Installation classification per DIN VDE 0110, Table 1
for rated mains voltage ≤ 150 V_rms
for rated mains voltage ≤ 300 V_rms
for rated mains voltage ≤ 600 V_rms
Climatic Classification
Pollution Degree (DIN VDE 0110/39)
Maximum Working Insulation Voltage
V_IORM
Input to Output Test Voltage, Method b*
V_PR
V_IORM x 1.875 = V_PR, 100% Production Test with t_m=1 sec,
Partial discharge < 5 pC
Input to Output Test Voltage, Method a*
V_PR
V_IORM x 1.6 = V_PR, Type and Sample Test, t_m=10 sec,
Partial discharge < 5 pC
Highest Allowable Overvoltage
V_IOTM
(Transient Overvoltage t_ini = 60 sec)
Safety-limiting values – maximum values allowed in the event of a failure
Case Temperature
Input Current
Output Power
Insulation Resistance at T_S, V_IO = 500 V
T_S
I_{S, INPUT}
P_{S, OUTPUT}
R_S
PDIP Option 060 SO-8 Option 060 Unit
I – IV
I – IV
I – III
40/85/21
2
630
1181
I – IV
I – IV
I – III
40/85/21
2
567
1063
V_peak
V_peak
1008
907
V_peak
6000
6000
V_peak
175
230
600
≥10⁹
150
°C
150
mA
600
mW
≥10⁹
W
* Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-5, for a
detailed description.
6