HCPL-063A-000E Datasheet, PDF (4/17 Pages) AVAGO TECHNOLOGIES LIMITED – HCMOS Compatible, High CMR, 10 MBd Optocouplers

HCPL-261A/261N/263A/263N Outline Drawing
Pin Location (for reference only)
9.40 (0.370)
9.90 (0.390)
TYPE NUMBER
87
6
5
OPTION CODE*
A XXXXZ
DATE CODE
YYWW
PIN ONE 1
2
3
4
1.78 (0.070) MAX.
1.19 (0.047) MAX.
6.10 (0.240)
6.60 (0.260)
7.36 (0.290)
7.88 (0.310)
0.20 (0.008)
0.33 (0.013)
5 TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS.
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
0.76 (0.030)
1.40 (0.056)
0.65 (0.025) MAX.
2.28 (0.090)
2.80 (0.110)
Figure 1. 8-Pin dual in-line package device outline drawing.
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
LAND PATTERN RECOMMENDATION
1.02 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
0.20 (0.008)
0.33 (0.013)
1.080 ± 0.320
(0.043 ± 0.013)
2.540
(0.100)
BSC
0.635 ± 0.130
(0.025 ± 0.005)
0.635 ± 0.25
(0.025 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
TOLERANCES (UNLESS OTHERWISE SPECIFIED): xx.xx = 0.01
xx.xxx = 0.005
LEAD COPLANARITY
MAXIMUM: 0.102 (0.004)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Figure 2. Gull wing surface mount option #300.
12 NOM.
4