HCPL-260L Datasheet, PDF (5/19 Pages) AVAGO TECHNOLOGIES LIMITED – High Speed LVTTL Compatible 3.3 Volt Optocouplers Low power consumption

Reflow Soldering Profile
Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
Regulatory Information
The HCPL-260L/060L/263L/063L have been approved by the following organizations:
UL
Approval under UL 1577, Component Recognition Program, File E55361.
CSA
Approval under CSA Component Acceptance Notice #5, File CA 88324.
IEC/EN/DIN EN 60747-5-5
Insulation and Safety Related Specifications


Parameter
Symbol
8-Pin DIP
(300 Mil) SO-8
Value Value Units
Minimum External Air
L (101)
7.1
4.9
mm
Gap (External Clearance)
Minimum External Tracking L (102)
7.4
4.8
mm
(External Creepage)
Minimum Internal Plastic
0.08
0.08 mm
Gap (Internal Clearance)


Tracking Resistance
CTI
(Comparative Tracking Index)
200
200 Volts
Isolation Group
IIIa
IIIa
Conditions
Measured from input terminals to output
terminals, shortest distance through air.
Measured from input terminals to output
terminals, shortest distance path along body.
Through insulation distance, conductor
to conductor, usually the direct distance
between the photoemitter and
photodetector inside the optocoupler cavity.
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table 1)
5