HCPL-2503-000E Datasheet, PDF (5/12 Pages) AVAGO TECHNOLOGIES LIMITED – Single Channel, High Speed Logic Interface Optocoupler

Regulatory Information
The devices contained in this data sheet have been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
(HCNW and Option 060 only)
Insulation and Safety Related Specifications
Parameter
Symbol
8-Pin DIP
Widebody
(300 Mil) SO-8 (400 Mil)
Value
Value
Value
Units      Conditions
Minimum External L(101)
7.1
4.9
9.6
mm Measured from input terminals
Air Gap (External
to output terminals, shortest
Clearance)
distance through air.
Minimum External L(102)
7.4
4.8
10.0
mm Measured from input terminals
Tracking (External
to output terminals, shortest
Creepage)
distance path along body.
Minimum Internal
Plastic Gap
(Internal Clearance)
0.08
0.08
1.0
mm Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Minimum Internal
Tracking (Internal
Creepage)
NA
NA
4.0
mm Measured from input terminals
to output terminals, along
internal cavity.
Tracking Resistance
CTI
(Comparative
Tracking Index)
200
200
200
Volts DIN IEC 112/VDE 0303 Part 1
Isolation Group
IIIa
IIIa
IIIa
Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classification is Class A in accordance with CECC 00802.