HCPL-2300-000E Datasheet, PDF (2/14 Pages) AVAGO TECHNOLOGIES LIMITED – 8 MBd Low Input Current Optocoupler

Schematic
The output of the shielded integ­ rated detector circuit is
an open collector Schottky clamped tran­sistor. The shield,
which shunts capacitively coupled common mode noise
to ground, provides a guaranteed transient immunity
specification of 100 V/µs. The output circuit includes an
optional integrated 1000 Ω pull-up resistor for the open
collector. This gives designers the flexibility to use the
internal resistor for pull-up to five volt logic or to use an
external resistor for connec­tion to supply voltages up to
18 V (CMOS logic voltage).
The Electrical and Switching Characteristics of the
HCPL-2300/HCPL-0300 are guaranteed over a tempera­
ture range of -40°C to 85°C. This enables the user to con-
fidently design a circuit which will operate under a broad
range of operating conditions.
Ordering Information
HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and are approved under CSA Component Ac-
ceptance Notice #5, File CA 88324.
   Option
Part
Number
RoHS
non RoHS
Compliant Compliant
Surface Gull Tape & UL 5000 Vrms/ IEC/EN/DIN
Package Mount Wing Reel 1 Minute rating EN 60747-5-5 Quantity
-000E
no option
50 per tube
-300E
#300
X
X
50 per tube
-500E
HCPL-2300
-060E
#500
#060
X
X
X
300 mil DIP-8
1000 per reel
X
50 per tube
-360E
#360
X
X
X
50 per tube
-560E
#560
X
X
X
X
1000 per reel
-000E
no option
X
HCPL-0300
SO-8
-500E
#500
X
X
100 per tube
1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry. Combination of Option 020 and Option 060 is not available.
Example 1:
HCPL-2300-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-5 Safety Approval and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
2