5962-9314002HPA Datasheet, PDF (2/11 Pages) AVAGO TECHNOLOGIES LIMITED – 90 V/1.0 Ohm, Hermetically Sealed, Power MOSFET Optocoupler

All devices are manufactured and tested on a MIL-
PRF-38534 certified line and are included in the DLA Qual-
ified Manufacturers List, QML-38534 for Hybrid Microcir-
cuits. Each device contains an AlGaAs light emitting diode
optically coupled to a photovoltaic diode stack which
drives two discrete power MOSFETs. The device oper-
ates as a solid-state replacement for single-pole, normally
open, (1 Form A) relay used for general purpose switching
of signals and loads in high reliability applications.
The devices feature logic level input control and very low
output on-resistance, making them suitable for both ac
and dc loads. Connection A, as shown in the Functional
Diagram, allows the device to switch either ac or dc loads.
Connection B, with the polarity and pin configuration as
shown, allows the device to switch dc loads only. The ad-
vantage of Connection B is that the on-resistance is sig-
nificantly reduced, and the output current capability in-
creases by a factor of two.
The devices are convenient replacements for mechanical
and solid state relays where high component reliability
with standard footprint lead configuration is desirable.
Devices may be purchased with a variety of lead bend
and plating options. See Selection Guide table for details.
Standard Microcircuit Drawing (SMD) parts are available
for each package and lead style.
The HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E and
SMD 5962-93140 are designed to switch loads on 28 Vdc
power systems. They meet 80 V surge and ± 600 V spike
requirements.
Selection Guide – Lead Configuration Options
Avago Technologies’s Part Number and Options
Commercial
MIL-PRF-38534 Class H
MIL-PRF-38534 Class E
Standard Lead Finish
Solder Dipped*
Butt Joint/Gold Plate
Gull Wing/Soldered*
Crew Cut/Gold Plate
SMD Part Number
Prescript for all below
Gold Plate
Solder Dipped*
Butt Joint/Gold Plate
Butt Joint/Soldered*
Gull Wing/Soldered*
Crew Cut/Gold Plate
Crew Cut/Soldered*
* Solder Contains Lead
HSSR-7110
HSSR-7111
Gold Plate
Option #200
Option #100
Option #300
Option #600
5962- 5962-
9314001HPC
9314001HPA
9314001HYC
9314001HYA
9314001HXA
9314001HZC
9314001HZA
HSSR-7112
Gold Plate
Option -200
Option -100
Option -300
9314002HPC
9314002HPA
9314002HYC
9314002HYA
9314002HXA
HSSR-711E
Gold Plate
Option -200
9314001EPC
9314001EPA
CAUTION: Maximum Switching Frequency – Care should be taken during repetitive switching of loads so as not to exceed the
maximum output current, maximum output power dissipation, maximum case temperature, and maximum junction temperature.
2