HCPL-4200-300 Datasheet, PDF(13/13 Page) AVAGO TECHNOLOGIES LIMITED – Optically Coupled 20 mA Current Loop Receiver

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

HCPL-4200-300 Datasheet, PDF (13/13 Pages) AVAGO TECHNOLOGIES LIMITED – Optically Coupled 20 mA Current Loop Receiver

◁

of common mode inï¬uences, elimination of ground

potential diï¬erences and reduction of power supply re-

quirements. With this combination of HCPL-4100/-4200

optocouplers, speciï¬c current loop noise immunity is

provided, i.e., minimum SPACE state current noise im-

munity is 1 mA, MARK state noise immunity is 8 mA.

Voltage compliance of the current source must be of an

adequate level for operating all units in the loop while

not exceeding 27 V dc, the maximum breakdown voltage

for the HCPL-4100. Note that the HCPL-4100 transmitter

will allow loop current to conduct when input V power

is oï¬. Consult the HCPL-4100 transmitter optocoupler

data sheet for speciï¬ed device performance.

For more information about the HCPL-4100/-4200 opto-

couplers, consult Application Note 1018.

Figure 21. Full Duplex Point-to-Point Current Loop System Conï¬guration.

Figure 22. Half Duplex Current Loop System Conï¬gurations for (a) Point-to-Point, (b) Multidrop.

For product information and a complete list of distributors, please go to our website: www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.

AV02-2353EN - February 8, 2010