HCPL-J312 Datasheet, PDF (1/24 Pages) AVAGO TECHNOLOGIES LIMITED – 2.5 Amp Output Current IGBT Gate Drive Optocoupler

HCPL-3120/J312, HCNW3120
2.5 Amp Output Current IGBT Gate Drive Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The HCPL-3120 contains a GaAsP LED while the HCPL­­­-
J312 and the HCNW3120 contain an AlGaAs LED. The LED
is optically coupled to an integrated circuit with a power
output stage. These optocouplers are ideally suited for
driving power IGBTs and MOSFETs used in motor control
inverter applications. The high operating voltage range
of the output stage provides the drive voltages required
by gate controlled devices. The voltage and current
supplied by these optocouplers make them ideally
suited for directly driving IGBTs with ratings up to 1200
V/100 A. For IGBTs with higher ratings, the HCPL-3120
series can be used to drive a discrete power stage which
drives the IGBT gate. The HCNW3120 has the highest in-
sulation voltage of V_IORM = 1414 Vpeak in the IEC/EN/DIN
EN 60747-5-2. The HCPL-J312 has an insulation voltage
of V_IORM = 891 V_peak and the V_IORM = 630 V_peak is also
available with the HCPL-3120 (Option 060).
Functional Diagram
•  2.5 A maximum peak output current
•  2.0 A minimum peak output current
•  25 kV/µs minimum Common Mode Rejection (CMR) at
V_CM = 1500 V
•  0.5 V maximum low level output voltage (V_OL)
Eliminates need for negative gate drive
•  I_CC = 5 mA maximum supply current
•  Under Voltage Lock-Out protection (UVLO) with
hysteresis
•  Wide operating V_CC range: 15 to 30 Volts
•  500 ns maximum switching speeds
•  Industrial temperature range: ‑40°C to 100°C
•  SafetyApproval:
UL Recognized
3750 Vrms for 1 min. for HCPL‑3120/J312
HCPL-3120/J312
N/C 1
8 VCC
N/C 1
HCNW3120
8 VCC
5000 Vrms for 1 min. for HCNW3120
CSA Approval
ANODE ₂
7 ^VO ANODE 2
7 ^VO _{IEC/EN/DIN EN 60747-5-2 Approved}
CATHODE 3
6 VO CATHODE 3
6 N/C V_IORM = 630 V_peak for HCPL‑3120 (Option 060)
N/C 4 _SHIELD
5 VEE
N/C 4 _SHIELD
5 VEE VIORM = 891 Vpeak for HCPL‑J312
V_IORM = 1414 V_peak for HCNW3120
TRUTH TABLE
V_CC - V_EE
“POSITIVE GOING”
V_CC - V_EE
“NEGATIVE GOING”
Applications
•  IGBT/MOSFET gate drive
LED (i.e., TURN-ON) (i.e., TURN-OFF)
V_O
•  AC/Brushless DC motor drives
OFF
0 - 30 V
ON
0 - 11 V
ON
11 - 13.5 V
0 - 30 V
0 - 9.5 V
9.5 - 12 V
LOW
LOW
TRANSITION
•  Industrial inverters
•  Switch mode power supplies
ON
13.5 - 30 V
12 - 30 V
HIGH
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.