5962-9800101KEC Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – Hermetically Sealed, High Speed, High CMR, Logic Gate Optocouplers

6N134,* 81028, HCPL-563X, HCPL-663X,
HCPL-565X, 5962-98001, HCPL-268K,
HCPL-665X, 5962-90855, HCPL-560X
Hermetically Sealed, High Speed, High CMR, Logic Gate Optocouplers
Data Sheet
*See matrix for available extensions.
Description
These units are single, dual and quad channel, hermeti-
cally sealed optocouplers. The products are capable of
operation and storage over the full military temperature
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from the appropriate DLA Drawing. All devices are man-
ufactured and tested on a MIL-PRF-38534 certified line
and are included in the DLA Qualified Manufacturers
List QML-38534 for Hybrid Microcircuits. Quad channel
devices are available by special order in the 16 pin DIP
through hole packages.
Functional Diagram
V_CC
V_E
V_OUT
GND
Multiple channel devices available
Truth Table (Positive Logic)
Multichannel Devices
Input
On (H)
Off (L)
Output
L
H
Single Channel DIP
Input
On (H)
Off (L)
On (H)
Off (L)
Enable
H
H
L
L
Output
L
H
H
H
Features
 Dual marked with device part number and DLA
drawing number
 Manufactured and tested on a MIL-PRF-38534
Certified Line
 QML-38534, Class H and K
 Five hermetically sealed package configurations
 Performance guaranteed over full military
temperature range: -55°C to +125°C
 High speed: 10 Mbd typical
 CMR: > 10,000 V/μs typical
 1500 Vdc withstand test voltage
 2500 Vdc withstand test voltage for HCPL-565X
 High radiation immunity
 6N137, HCPL-2601, HCPL-2630/31 function
compatibility
 Reliability data
 TTL circuit compatibility
Applications
 Military and aerospace
 High reliability systems
 Transportation, medical, and life critical systems
 Line receiver
 Voltage level shifting
 Isolated input line receiver
 Isolated output line driver
 Logic ground isolation
 Harsh industrial environments
 Isolation for computer, communication, and test
equipment systems
The connection of a 0.1 μF bypass capacitor between V_CC and GND is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.