ATMEGA88PA_14 Datasheet, PDF (7/326 Pages) ATMEL Corporation – ATMEL 8-BIT MICROCONTROLLER

3. Automotive Quality Grade
The Atmel^® ATmega48PA/88PA/168PA have been developed and manufactured according to the most stringent
requirements of the international standard ISO-TS-16949. This data sheet contains limit values extracted from the results of
extensive characterization (temperature and voltage).
The quality and reliability of the Atmel ATmega48PA/88PA/168PA have been verified during regular product qualification as
per AEC-Q100 grade 1 (–40°C to +125°C).
Table 3-1. Temperature Grade Identification for Automotive Products
Temperature (°C)
Temperature Identifier
Comments
–40; +125
Z
Full automotive temperature range
4. Resources
A comprehensive set of development tools, application notes and datasheets are available for download on
http://www.atmel.com/avr.
Note: 1.
5. Data Retention
Reliability qualification results show that the projected data retention failure rate is much less than 1 PPM over 20 years at
85°C.
6. About Code Examples
This documentation contains simple code examples that briefly show how to use various parts of the device. These code
examples assume that the part specific header file is included before compilation. Be aware that not all C compiler vendors
include bit definitions in the header files and interrupt handling in C is compiler dependent. Please confirm with the C
compiler documentation for more details.
For I/O registers located in extended I/O map, “IN”, “OUT”, “SBIS”, “SBIC”, “CBI”, and “SBI” instructions must be replaced
with instructions that allow access to extended I/O. Typically “LDS” and “STS” combined with “SBRS”, “SBRC”, “SBR”, and
“CBR”.
ATmega48PA/88PA/168PA [DATASHEET]
7
9223F–AVR–04/14