|
ATXMEGA256A3BU Datasheet, PDF (1/143 Pages) ATMEL Corporation – 8/16-bit Atmel XMEGA A3BUMicrocontroller | |||
|
Features
8/16-bit Atmel XMEGA A3BUMicrocontroller
ATxmega256A3BU
ï¬ High-performance, low-power Atmel®AVR®XMEGA® 8/16-bit Microcontroller
ï¬ Nonvolatile program and data memories
ï¬ 256KBytes of in-system self-programmable flash
ï¬ 8KBytes boot section
ï¬ 4KBytes EEPROM
ï¬ 16KBytes internal SRAM
ï¬ Peripheral features
ï¬ Four-channel DMA controller
ï¬ Eight-channel event system
ï¬ Seven 16-bit timer/counters
ï¬ Four timer/counters with four output compare or input capture channels
ï¬ Three timer/counters with two output compare or input capture channels
ï¬ High resolution extension on all timer/counters
ï¬ Advanced waveform extension (AWeX) on one timer/counter
ï¬ One USB device interface
ï¬ USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant
ï¬ 32 Endpoints with full configuration flexibility
ï¬ Six USARTs with IrDA support for one USART
ï¬ Two two-wire interfaces with dual address match (I2C and SMBus compatible)
ï¬ Two serial peripheral interfaces (SPIs)
ï¬ AES and DES crypto engine
ï¬ CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator
ï¬ 32-bit real time counter (RTC) with separate oscillator and battery backup system
ï¬ Two sixteen-channel, 12-bit, 2msps Analog to Digital Converters
ï¬ One two-channel, 12-bit, 1msps Digital to Analog Converter
ï¬ Four Analog Comparators with window compare function, and current sources
ï¬ External interrupts on all general purpose I/O pins
ï¬ Programmable watchdog timer with separate on-chip ultra low power oscillator
ï¬ QTouch® library support
ï¬ Capacitive touch buttons, sliders and wheels
ï¬ Special microcontroller features
ï¬ Power-on reset and programmable brown-out detection
ï¬ Internal and external clock options with PLL and prescaler
ï¬ Programmable multilevel interrupt controller
ï¬ Five sleep modes
ï¬ Programming and debug interfaces
ï¬ JTAG (IEEE 1149.1 compliant) interface, including boundary scan
ï¬ PDI (Program and Debug Interface)
ï¬ I/O and packages
ï¬ 47 programmable I/O pins
ï¬ 64-lead TQFP
ï¬ 64-pad QFN
ï¬ Operating voltage
ï¬ 1.6 â 3.6V
ï¬ Operating frequency
ï¬ 0 â 12MHz from 1.6V
ï¬ 0 â 32MHz from 2.7V
8362FâAVRâ02/2013
|
▷ |