AT17F16A_14 Datasheet, PDF (1/16 Pages) ATMEL Corporation – Simple Interface to SRAM FPGAs

Features
• Programmable 16, 777, 216 x 1-bit Serial Memories Designed to Store Configuration
Programs for Field Programmable Gate Arrays (FPGAs)
• 3.3V Output Capability
• 5V Tolerant I/O Pins
• Program Support using the Atmel ATDH2200E System or Industry Third-party
Programmers
• In-System Programmable (ISP) via 2-wire Bus
• Simple Interface to SRAM FPGAs
• Compatible with Atmel AT40K and AT94K Devices, Altera^® FLEX^®, Excalibur^™, Stratix^®,
Cyclone^™ and APEX^™ Devices
• Cascadable Read-back to Support Additional Configurations or Higher-density Arrays
• Low-power CMOS FLASH Process
• Available in 8-lead LAP and 20-lead PLCC Packages
• Emulation of Atmel’s AT24CXXX Serial EEPROMs
• Low-power Standby Mode
• Single Device Capable of Holding 4 Bit Stream Files Allowing Simple System
Reconfiguration
• Fast Serial Download Speeds up to 33 MHz
• Endurance: 10,000 Write Cycles Typical
• Green (Pb/Halide-free/RoHS Compliant) Packages
FPGA
Configuration
Flash Memory
AT17F16A
1. Description
The AT17FxxA Series of In-System Programmable Configuration PROMs (Configura-
tors) provide an easy-to-use, cost-effective configuration memory for Field
Programmable Gate Arrays. The AT17FxxA Series device is packaged in the 8-lead
LAP and 20-lead PLCC, see Table 1-1. The AT17FxxA Series Configurator uses a
simple serial-access procedure to configure one or more FPGA devices.
The AT17FxxA Series Configurators can be programmed with industry-standard pro-
grammers, Atmel’s ATDH2200E Programming Kit or Atmel’s ATDH2225 ISP Cable.
Table 1-1. AT17FxxA Series Packages
Package
8-lead LAP
20-lead PLCC
AT17F16A
Yes
Yes
3474E–CNFG–2/08