AIF12W300 Datasheet, PDF (16/38 Pages) Astec America, Inc – DC-DC Converter Module

Technical Reference Notes
AIF12W300 DC-DC Series
Basic Operation and Features (continued)
Power Good / Identification (PG/ID)
This pin provides an indication that the module’s converters are working, and can also be used to identify the factory set output
voltage of the module. The PG/ID pin goes high to the level of the output voltage (V_O) to indicate that the module is operating
and delivering power. The output goes low if the converters stop operating due to a fault such as an overtemperature or
overvoltage condition. The PG/ID pin will also go low if the module is disabled via the ENABLE pin or under light load
condition.
The resistance between the PG/ID pin and the +ve output of the module can be used to identify the module with no power
applied according to the table:
Model Number
AIF12W300-L
AIF12W300N-L
AIF12W300-NTL
AIF12W300N-NTL
Resistance (kΩ)
47
47
47
47
MODEL: AIF12W300 SERIES
JUNE 2006
SHEET 16 OF 37