WB85 Datasheet, PDF (3/17 Pages) ASM GmbH – Analog Output

POSITAPE^®
WB85
Analog Output, redundant
Position sensor with measuring tape
•• Measurement range up to 6000 mm
•• Protection class IP67/IP69K
•• Stainless steel measuring tape
•• Analog output, redundant
Specifications
Outputs
Resolution
Linearity
Sensing device
Material
Protection class
Connection
Shock
Vibration
EMC, temperature
U 2R
U8R
I1R
Voltage 0.5 ... 10 V, redundant
Voltage 0.5 ... 4.5 V, redundant
Current 4 ... 20 mA, 3 wire, redundant
<0.05 mm
±0.10 % f. s.; optional ±0.05 %
Magnetic absolute encoder
Plastic and stainless steel;
Tape: stainless steel, 10 mm wide, 0.08 mm thick
IP67/IP69K (with mating connector)
Connector M12, 8 pin
EN 60068-2-27:2010, 100 g/11 ms, 100 shocks
EN 60068-2-6:2008, 20 g 10 Hz-2 kHz, 10 cycles
Refer to output specification
Order code WB85
WB85
Model name
Measurement range (in mm)
5000 / 6000
Output
U2R = 0.5 ... 10 V signal conditioner, redundant
U8R = 0.5 ... 4.5 V signal conditioner, redundant
I1R = 4 ... 20 mA signal conditioner, redundant

Signal characteristics
A/A = Output 1 increasing, output 2 increasing
A/D = Output 1 increasing, output 2 decreasing
D/D = Output 1 decreasing, output 2 decreasing
Linearity
L10 = ±0.10 % (standard)
L05 = ±0.05 % (optional)
Connection
M12R8 = Connector M12, 8 pin
Dust wiper
BAB1
Order code connector cable see page 15
Order example: WB85 - 6000 - I1R - A/D - L10 - M12R8 - BAB1
BAB1
DB-WB85-E-2013-11
3/17
www.asm-sensor.com
© ASM GmbH