7075 Datasheet, PDF (2/8 Pages) ASM GmbH – WAVEFORM GENERATOR

1
Even for Complex Signals, Evaluation is
Made Easy
Features
1. Multiple Channels
Four channels (7075) or two channels (7075-01) are
provided in a compact, lightweight unit. Multi-channel
evaluations such as 3-phase motor simulations can be
produced with a single device.
2. Channel-Independent Operation
Waveform selection and various settings, including
custom waveform sampling clock frequency and sweep
control can be set and activated independently for each
channel.
3. Simple Operation
Simple, direct operation is provided by a touch panel
user interface.
4. Easy to Use with Actual Waveforms
Waveforms measured with a MEMORY HiCORDER
can be downloaded to 3.5" floppy disk or GP-IB.
Amplitude and time axes data are downloaded together,
so the actual waveforms can be reconstructed.
Waveforms and settings can also be saved. The floppy
drive is compatible with 1.44-MB MS-DOS format.
5. Synchronized Drive Capability
With one unit configured as the master, up to four units
(16 channels) can be driven synchronously.
6. Timing Simulation by External Trigger
Each channel can be independently triggered by terminals
on the rear, so various timings can be simulated.
7. Bundled Waveform Creation Software
The bundled 7990 WAVEFORM CREATION
SOFTWARE creates waveforms in the Windows^™
environment on a PC. Capabilities range from custom
waveform design to processing actual waveform
simulations. Created waveforms are transferred to the
7075 by floppy disk or RS-232C interface.
8. External Control
External control can be provided through the GP-IB
interface. Waveforms from a MEMORY HiCORDER
can also be downloaded by GP-IB.
12
3
4
Basic Features
q Large 128,000-Word/Channel Memory
The large arbitrary waveform memory consists of 128,000
words per channel. Even at the fastest 10 MHz clock,
12.8 ms custom waveforms can be output.
q 16-Bit Voltage Axis Resolution,
Up to 10 MHz Clock
The 16-bit resolution on the voltage axis and 10 MHz
maximum clock provide faithful reproduction of actual
waveforms and high-quality custom waveform output
capability.
Three output ranges (0.1, 1 and 10V peak) are provided.
q Sweep Sequence Functions Installed
Frequency, amplitude and offset can be swept
simultaneously, and combinations of sweep conditions
in up to 128 steps allow easy generation of complex
signals for evaluation.
5
6
78
q Eight Basic Waveforms Built In
Eight basic waveforms: sine, square, pulse, triangle,
ramp up, ramp down, noise and DC are selectable in the
function generator mode. Eight waveforms can also be
stored in the arbitrary waveform mode, allowing quick
handling of all types of waveforms.
7075 Basic Features
Function
Generator Mode
Arbitrary
Waveform Mode
• 8 basic waveform types
• Sine and square waves from
10 mHz to 10 MHz
±10V
Output
• Triangle, ramp and pulse
waves from 10 mHz to 200 kHz
• Long-duration memory
of 128,000 words/ch
• 16-bit voltage axis
resolution