IC-LV_16 Datasheet, PDF (3/15 Pages) IC-Haus GmbH – 5-BIT OPTO ENCODER

iC-LV
5-BIT OPTO ENCODER
Rev C1, Page 3/15
PIN CONFIGURATION BLCC LV4C
PIN FUNCTIONS
No. Name Function
1 LED LED Power Control Output
(high-side current source)
2 GND Ground
3 SOUT Serial Data Output (SSI)
/ Data Output D4
4 SERIN Serial Data Input (SSI) / Data Outp. D3
5 SCLK Clock Input (SSI) / Data Output D2
6 SYNM0 Synchronisation Mode Input
/ Data Output D1
7 SYNM1 Synchronisation Mode Input
/ Data Output D0
8 SEEN Serial Error Bit Enable Inp. (high act.)
9 n.c.¹⁾
10 VDD +4...+5.5 V Supply Voltage
11 NINV Bit-wise Inversion Input (low active)
12 MODE Operating Mode Selection Input
13 TEST Test Mode Enable Input (high active)
14 RSET LED Power Control Adjustment
(wiring is optional)
15 NERR Error Output (low active)
16 NDIR Direction Input (low active)
For dimensional specifications refer to the package datasheet iC-LV BLCC LV4C, available separately.
PIN CONFIGURATION oQFN32-5x5
32 31 30 29 28 27 26 25
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9 10 11 12 13 14 15 16
PIN FUNCTIONS
No. Name Function
1 LED LED Power Control Output
(high-side current source)
2 GND Ground
3 SOUT Serial Data Output (SSI)
/ Data Output D4
4 SERIN Serial Data Input (SSI) / Data Outp. D3
5 SCLK Clock Input (SSI) / Data Output D2
6 SYNM0 Synchronisation Mode Input
/ Data Output D1
7 SYNM1 Synchronisation Mode Input
/ Data Output D0
8 SEEN Serial Error Bit Enable Inp. (high act.)
9... n.c.¹⁾
18 VDD +4...+5.5 V Supply Voltage
19 NINV Bit-wise Inversion Input (low active)
20 MODE Operating Mode Selection Input
21 TEST Test Mode Enable Input (high active)
22 RSET LED Power Control Adjustment
(wiring is optional)
23 NERR Error Output (low active)
24 NDIR Direction Input (low active)
25... n.c.¹⁾
BP
Backside paddle²⁾
IC top marking: <P-CODE> = product code, <A-CODE> = assembly and lot code (subject to changes);
1) Pin numbers marked n.c. are not in use.
2) The backside paddle may have a single link to GND. A current flow across the paddle is not permissible.