X3C25P1-02S Datasheet, PDF (6/18 Pages) Anaren Microwave – Tight Amplitude Balance

Model X3C25P1-02S
Rev B
Definition of Measured Specifications
Parameter
Definition
VSWR
(Voltage Standing Wave
Ratio)
The impedance match of
the coupler to a 50
system. A VSWR of 1:1 is
optimal.
Return Loss
Insertion Loss
Isolation
Phase Balance
The impedance match of
the coupler to a 50
system. Return Loss is
an alternate means to
express VSWR.
The input power divided
by the sum of the power
at the two output ports.
The input power divided
by the power at the
isolated port.
The difference in phase
angle between the two
output ports.
Mathematical Representation
V max
VSWR =
Vmin
Vmax = voltage maxima of a standing wave
Vmin = voltage minima of a standing wave
VSWR 1
Return Loss (dB)= 20log
VSWR -1
Pin
Insertion Loss(dB)= 10log
P P cpl  direct
P in
Isolation(dB)= 10log
Piso
Phase at coupled port – Phase at direct port
Amplitude Balance
The power at each output
divided by the average
power of the two outputs.
Pcpl
Pdirect
10log
and 10log
 Pcpl  Pdirect 
 Pcpl  Pdirect 




²ïƒ¸
²ïƒ¸
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel for Pick and Place
Manufacturing.