English
Language : 

AAT2860 Datasheet, PDF (5/23 Pages) Advanced Analogic Technologies – Backlight/Flash LED Driver and Multiple LDO Lighting Management Unit
PRODUCT DATASHEET
AAT2860
ChargePumpTM Backlight/Flash LED Driver and Multiple LDO Lighting Management Unit
Electrical Characteristics1
VIN = 3.6V; CIN = 4.7µF; COUT = CLDO(A, B, C) = 2.2μF; C1 = C2 = 1µF; TA = -40°C to +85°C, unless otherwise noted.
Typical values are TA = 25°C.
Symbol Description
LDO Regulators
ΔVLDO[A/B/C]/
VLDO[A/B/C]
LDOA, LDOB, LDOC Output
Voltage Tolerance
ILDO[A/B/C](MAX)
LDOA, LDOB, LDOC Maximum
Load Current
VLDO[A/B/C](DO)
LDOA, LDOB, LDOC Dropout
Voltage2
∆VLDO/
VLDO*∆VIN
PSRR[A/B/C]
Line Regulation
LDOA, LDOB, LDOC Power
Supply Rejection Ratio
RLDO_(DCHG)
LDOA, LDOB, LDOC Auto-
Discharge Resistance
I2C Logic and Control Interface
VIL
SDA, SCL, LED_SEL, FL_LVL,
LDO_SEL Input Low Threshold
VIH
SDA, SCL, LED_SEL, FL_LVL,
LDO_SEL Input High Threshold
IIN
SDA, SCL, LED_SEL, FL_LVL,
LDO_SEL Input Leakage Current
fSCL
tLOW
tHIGH
tHD_STA
tSU_STA
tSU_DAT
tHD_DAT
tSU_STO
tBUF
SCL Clock Frequency
SCL Clock Low Period
SCL Clock High Period
Hold Time START Condition
Setup Time for Repeat START
SDA Data Setup Time
SDA Data HOLD Time
Setup Time for STOP Condition
Bus Free Time Between STOP
and START Conditions
Conditions
ILDO = 1mA to 300mA; TA = 25°C
ILDO = 1mA to 300mA; TA = -40°C to +85°C
VLDO[A/B/C] ≥ 2.7V; ILDO = 150mA
VIN = (VLDO[A/B/C] + 1V) to 5V
ILDO[A/B/C] =10mA, 1kHz
2.7V ≤ VIN ≤ 5.5V
2.7V ≤ VIN ≤ 5.5V
SDA = SCL = LED_SEL = FL_LVL = LDO_SEL = 5V
Min
-1.5
-3
300
1.4
-1
0
1.3
0.6
0.6
0.6
500
0.5
0.6
1.3
Typ
75
0.09
40
20
0.4
Max Units
+1.5 %
+3
%
mA
150 mV
%/V
dB
Ω
V
V
1
µA
400 kHz
µs
µs
µs
µs
ns
µs
µs
µs
1. The AAT2860 is guaranteed to meet performance specifications over the -40°C to +85°C operating temperature range and is assured by design, characterization, and correla-
tion with statistical process controls.
2. VDO[A/B/C] is defined as VIN – LDO[A/B/C] when LDO[A/B/C] is 98% of nominal.
2860.2008.05.1.0
www.analogictech.com
5