 English |
|
|
|
|
|
|
|
| AAT1130 Datasheet, PDF (2/19 Pages) Advanced Analogic Technologies – 2.5MHz 500mA Step-Down DC/DC Converter | |||
| |||
| ◁ |
SwitchRegTM
PRODUCT DATASHEET
AAT1130
2.5MHz 500mA Step-Down DC/DC Converter
Pin Descriptions
Adj.
1
Fixed
n/a
2
2
3
3
4
4
5
6
n/a
7, 8, 9, 10
5
1
6
7, 8, 9, 10
Symbol
FB
VOUT
VCC
VP
LX
EN
PGND
GND
Function
Output voltage feedback input. FB senses the output voltage through a resistor voltage
divider circuit. Connect the voltage divider from the output voltage to FB. The feedback
threshold is 0.6V. (Adjustable output voltage versions only)
Output voltage feedback input. VOUT senses the output voltage. Connect VOUT to the
output voltage node to regulate the output voltage.
Input supply voltage. Connect VCC to the input supply voltage.
Power input supply voltage. Connect VP to the VCC pin, and to the input supply voltage.
Bypass VP to PGND with a 2.2μF or greater capacitor.
Switching node. Connect the LC ï¬lter between LX and the load. LX is internally connected
to the drain of the p-channel MOSFET switch and n-channel MOSFET synchronous rectiï¬er.
Enable input. Active logic high.
Power ground. Connect PGND to GND at a single point as close to the AAT1130 as possible.
Ground. For ï¬xed version, connect GND to PGND at a single point as close to the
AAT1130-xx as possible.
Pin Configuration
Adjustable Output
Voltage Version
FB 1
VOUT 2
VCC 3
VP 4
LX 5
12 GND
11 GND
10 GND
9 GND
8 EN
SC70JW-10
(Top View)
Fixed Output
Voltage Version
EN 1
VOUT 2
VCC 3
VP 4
LX 5
10 GND
9 GND
8 GND
7 GND
6 PGND
2
www.analogictech.com
1130.2008.08.1.1
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese