|
AAT2315_07 Datasheet, PDF (1/22 Pages) Advanced Analogic Technologies – Dual 600mA Step-Down Converter with Synchronization | |||
|
General Description
The AAT2513 is a high efficiency dual synchronous
step-down converter for applications where power
efficiency, thermal performance and solution size
are critical. Input voltage ranges from 2.7V to 5.5V,
making it ideal for systems powered by single-cell
lithium-ion/polymer batteries.
Each converter is capable of 600mA output current
and has its own enable pin. Efficiency of the con-
verters is optimized over full load range. Total no
load quiescent current is 60µA, allowing high effi-
ciency even under light load conditions.
The integrated power switches are controlled by
pulse width modulation (PWM) with a 1.7MHz typi-
cal switching frequency at full load, which minimizes
the size of external components. Fixed frequency,
low noise operation can be forced by a logic signal
on the MODE pin. Furthermore, an external clock
can be used to synchronize the switching frequency
of both converters.
A phase shift pin (PS) is available to operate the
two converters 180° out of phase at heavy load to
achieve low input ripple.
The AAT2513 is available in a Pb-free, thermally
enhanced 16-pin QFN33 package and is specified
for operation over the -40°C to +85°C temperature
range.
Typical Application
AAT2513
Dual 600mA Step-Down
Converter with Synchronization
Features
SystemPowerâ¢
⢠VIN Range: 2.7V to 5.5V
⢠Output Current:
â Channel 1: 600mA
â Channel 2: 600mA
⢠96% Efficient Step-Down Converter
⢠Low No Load Quiescent Current
â 60µA Total for Both Converters
⢠Integrated Power Switches
⢠100% Duty Cycle
⢠1.7MHz Switching Frequency
⢠Optional Fixed Frequency or External SYNC
⢠Logic Selectable 180° Phase Shift Between
the Two Converters
⢠Current Limit Protection
⢠Automatic Soft-Start
⢠Over-Temperature Protection
⢠QFN33-16 Package
⢠-40°C to +85°C Temperature Range
Applications
⢠Cellular Phones / Smart Phones
⢠Digital Cameras
⢠Handheld Instruments
⢠Micro Hard Disc Drives
⢠Microprocessor / DSP Core / IO Power
⢠PDAs and Handheld Computers
Input:
2.7V to 5.5V
CIN
1μF
VIN1
VIN2
LX1
VCC
FB1
AAT2513
LX2
MODE/SYNC
PS
EN1
EN2
AGND
FB2
PGND1 PGND2
L1
VOUT1
2μH
R1
L2
VOUT2
R2
2μH
R3
C1
4.7μF
R4
C2
4.7μF
2513.2007.04.1.1
1
|
▷ |