ALT6725 Datasheet, PDF (3/13 Pages) ANADIGICS, Inc – HELP3E Dual-band Cellular & PCS LTE 3.4 V Linear Power Amplifier Module

ALT6725
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply Voltage (VBATT, VCC, VCCA)
0
+5
V
Mode Control Voltage (VMODE1,2, VEN)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
Storage Temperature (TSTG)
-40 +150
°C
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
PARAMETER
MIN TYP MAX UNITS
COMMENTS
Operating Frequency (f)
814
1850
-
-
849
1915
UMTS Band 5, 6, 18, 19, & 26
MHz
UMTS Band 2 & 25
Supply Voltage (VCC, VCCA)
+0.8 +3.4 +4.35 V
Battery Voltage (VBATT)
+3.2 +3.4 +4.35 V
Enable Voltage (VEN_CELL, VEN_PCS)
+1.35
0
+1.8
0
+3.1
+0.5
V
PA “on”
PA “shut down”
Mode Control Voltage (VMODE1,2)
+1.35 +1.8 +3.1
0
0 +0.5
V
Logic High
Logic Low
Cellular RF Output Power UMTS
LTE, HPM
26.7 ⁽¹⁾ 27.5
-
LTE, MPM
-
15
-
LTE, LPM
-
9
-
dBm TS 36.101 Rel 8 for LTE
Cellular RF Output Power CDMA
CDMA, HPM
27.5 ⁽¹⁾ 28.0
-
CDMA, MPM
-
16.0
-
CDMA, LPM
-
10.0
-
dBm CDMA 2000, RC-1
PCS RF Output Power UMTS
LTE, HPM
LTE, MPM
LTE, LPM
26.5 ⁽¹⁾ 27.3
-
-
15
-
-
9
-
dBm TS 36.101 Rel 8 for LTE
PCS RF Output Power CDMA
CDMA, HPM
CDMA, MPM
CDMA, LPM
27.5 ⁽¹⁾ 28.0
-
-
16.0
-
-
10.0
-
dBm CDMA 2000, RC-1
Case Temperature (TC)
-30
-
+90
°C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Notes:
(1) For operation at VCC = +3.2 V, POUT is derated by 0.5 dB.
3
PRELIMINARY DATA SHEET - Rev 1.0
07/2012