ALT6705 Datasheet, PDF (3/12 Pages) ANADIGICS, Inc – HELP4 UMTS800 (Bands 5, 6, 18, 19, & 26) LTE, WCDMA, CDMA Multimode PAM

ALT6705
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply Voltage (VCC)
0
+5
V
Battery Voltage (VBATT)
0
+6
V
Control Voltages (VMODE1, VMODE2, VEN)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
Storage Temperature (TSTG)
-40 +150
°C
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
PARAMETER
MIN TYP MAX UNIT COMMENTS
Operating Frequency (f)
814
-
849
MHz
Supply Voltage (VCC)
+3.1 +3.4 +4.35
V
POUT ≤ +28.4 dBm
Enable Voltage (VEN)
+1.35 +1.8 +3.1
0
-
+0.5
V
PA “on”
PA “shut down”
Mode Control Voltage (VMODE1, VMODE2)
+1.35
0
+1.8
-
+3.1
+0.5
V
Low Bias Mode
High Bias Mode
WCDMA/UMTS Output Power ^{(1, 3)}
R99, HPM
HSPA (MPR = 0), HPM
LTE⁽²⁾ (MPR = 0), HPM
R99, MPM
LTE⁽²⁾ & HSPA (MPR = 0), MPM
R99, LPM
LTE⁽²⁾ & HSPA (MPR = 0), LPM
27.6 28.4
-
26.6 27.4
-
26.4 27.2
-
-
17.0
-
-
16.0
-
-
8.0
-
-
7.0
-
dBm
3GPP TS 34.121-1, Rel 8
Table C.11.1.3 for WCDMA
SUBTEST 1
TS 36.101 Rel 8 for LTE
CDMA Output Power ^{(1, 3)}
HPM
MPM
LPM
26.9 27.7
-
-
16.0
-
-
7.0
-
dBm CDMA 2000, RC1
Case Temperature (Tc)
-40
-
+90
8C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Notes:
(1) For operation at 3.1 V, POUT is derated by 0.8 dB.
(2) LTE waveform characteristics: up to 15 MHz, QPSK, RB = 16.
(3) For operation at +105 °C, POUT is derated by 1.0 dB.
3
Data Sheet - Rev 2.5
03/2012