ALT6702 Datasheet, PDF (3/12 Pages) ANADIGICS, Inc – HELP4 UMTS PCS (Band 2) LTE/WCDMA/CDMA Multi-Mode PAM

ALT6702
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply Voltage (VCC)
0
+5
V
Battery Voltage (VBATT)
0
+6
V
Control Voltages (VMODE1, VMODE2, VEN)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
Storage Temperature (TSTG)
-40 +150
°C
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
PARAMETER
Table 3: Operating Ranges
MIN TYP MAX UNIT
COMMENTS
Operating Frequency (f)
1850
-
1915 MHz
Supply Voltage (VCC)
+3.1 +3.4 +4.35
V
POUT < +28.6 dBm
Enable Voltage (VEN)
+1.35
0
+1.8
-
+3.1
+0.5
V
PA "on"
PA "shut down"
Mode Control Voltage (VMODE1,VMODE2)
WCDMA / UMTS Output Power ^{(1, 3)}
R99, HPM
HSPA (MPR=0), HPM
LTE⁽²⁾
R99, MPM
LTE⁽²⁾ & HSPA (MPR=0), MPM
R99, LPM
LTE⁽²⁾ & HSPA (MPR=0), LPM
CDMA Output Power ^{(1, 3)}
HPM
MPM
LPM
+1.35
0
27.8
26.8
26.6
-
-
-
-
27.2
-
-
+1.8
-
28.6
27.6
27.4
17.5
16.5
9.0
8.0
28.0
16.5
8.0
+3.1
+0.5
-
-
-
-
-
-
-
-
-
V
Low Bias Mode
High Bias Mode
dBm
3GPP TS 34.121-1, Rel 8
Table C.11.1.3 for WCDMA,
SUBTEST 1
TS 36.101 Rel 8 for LTE
dBm CDMA2000, RC-1
Case Temperature (TC)
-40
-
+90
°C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Notes:
(1) For Operation at 3.1 V, POUT is derated by 0.8 dB.
(2) LTE Waveform: Up to 20 MHz, 18 RB’s, QPSK.
(3) For Operation at +105 °C, POUT is derated by 1.0 dB.
3
Data Sheet - Rev 2.5
03/2012