TCS3771 Datasheet, PDF (23/33 Pages) ams AG – COLOR LIGHT-TO-DIGITAL CONVERTER with PROXIMITY SENSING

TCS3771
COLOR LIGHT-TO-DIGITAL CONVERTER
with PROXIMITY SENSING
TAOS110A − MARCH 2011
Configuration Register (0x0D)
The configuration register sets the wait long time.
Table 10. Configuration Register
7
6
5
4
3
2
1
0
Address
CONFIG
FIELD
lid ^Reserved
WLONG
Reserved
BITS
7:2
1
0
Reserved
WLONG Reserved _0x0D
DESCRIPTION
Reserved. Write as 0.
Wait Long. When asserted, the wait cycles are increased by a factor 12× from that programmed in the
WTIME register.
Reserved. Write as 0.
va _{Proximity Pulse Count Register (0x0E)}
ill ^{The proximity pulse count register sets the number of proximity pulses that will be transmitted. When proximity}
detection is enabled, a proximity detect cycle occurs after each RGBC cycle. PPULSE defines the number of
t ^{pulses to be transmitted.}
NOTE: The ATIME register will be used to time the interval between proximity detection events even if the RGBC
G _{s function is disabled.}
s ^A _{ent PPULSE}
m ^t FIELD
Technicaal ^{con PPULSE}
7
BITS
7:0
Table 11. Proximity Pulse Count Register
6
5
4
3
2
1
0
PPULSE
DESCRIPTION
Proximity Pulse Count. Specifies the number of proximity pulses to be generated.
Address
0x0E
Copyright E 2011, TAOS Inc.
22
r
www.taosinc.com
The LUMENOLOGY r Company
r