10-597107-171 Datasheet, PDF (71/73 Pages) Amphenol Corporation – Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors

MS/Standard
how to order
MIL-DTL-5015 and MIL-5015 Type (Solder Contacts)
MS 3102 A 18 – 3 P W (SR)
1
2 3 45 6 7 8
1. Connector Type
MS designates Military Standard
CS* designates service class A and C with proprietary
special contact arrangements
SG* designates service class E with proprietary special
contact arrangements
SM* designates service class F and R with proprietary
special contact arrangements
2. Connector Style
3100 wall mounting receptacle
3101 cable connecting plug
3102 box mounting receptacle
3106 straight plug
3108 90° plug
3. Service Class
A solid shell for general, non-environmental applications
C solid shell for pressurized applications
E environmental resisting
F environmental resisting with strain relief (MS part num-
ber only)
R lightweight environmental resisting
4., 5. Shell size and insert arrangement - see tables, pages
22–24.
6. Contact Types
P designates pin contact
S designates socket contact
7. Insert Rotation
“W”, “X”, “Y”, or “Z” designate that insert is rotated in its
shell from normal position. No letter required for normal
(no rotation) position.
8. (SR) strain relief for non-military connectors (For MS use
“F” class)
* For insert arrangements over 50 and shell size 40 and above.
Exceptions: 36-52, 40-1, 40-9 and 40-56 are MS approved.
Consult Amphenol, Sidney, NY for availability of alternate finishes, including black
and olive drab zinc alloys.
Proprietary (Crimp Contacts)
75 – 68 0
1
23
12 – 3 H
45 6
1. Connector Type
75 – connector utilizing silver plated contacts
80 – less contacts
85 – contacts utilizing 50 micro-inches gold over silver
plating
2. Service Class
68 service class A, general duty
474 service class F, environmental resisting
190 service class R, lightweight environmental resisting
3. Connector Style
0 wall mounting receptacle
1 cable connecting plug
2 box mounting receptacle
6 straight plug
8 90° plug
4. Shell Size Designator
Shell Size
8S 10S 10SL 12S 12 14S 14 16S 16 18
Shell Designator 8 10 11 12 13 14 15 16 17 18
Shell Size
20 22 24 28 32 36 40 44 48
Shell Designator 20 22 24 28 32 36 40 44 48
5. Insert Arrangements
See page 22-24.
6. Contact Type/Alternate Insert Rotation
P designates pin, S designates socket for normal position-
ing of inserts. When an alternate position of the connector
insert is required to prevent cross-mating, a different letter
(other than P or S) is used. See page 25 for description of
alternate positions, then convert to Amphenol^® proprietary
coding by the following charts:
Pin Contacts
MS Letter
Amphenol
Letter
PW
G
PX
I
PY
K
PZ
M
Socket Contacts
MS Letter
Amphenol
Letter
SW
H
SX
J
SY
L
SZ
N
70