10-597107-171 Datasheet, PDF (50/73 Pages) Amphenol Corporation – Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors

Thermocouple
contact availability
A complete line of cylindrical connectors containing ther-
mocouple insert arrangements is available. The contact
layout for a particular arrangement will be found in either
the MS/Standard contact arrangement section, pages
26-37, or the Special contact arrangement section, pages
38-48. All thermocouple contact layouts may contain
either iron, alumel, chromel, constantan, standard (cop-
per) or brass (dummy) contacts. See the thermocouple
tabulations on the following pages.
The following abbreviations are used in the contact mate-
rial column in the charts that follow. Also, thermocouple
contacts are color coded as shown. (This identification is
made by means of small dots of stain on the solder well
end of the contact).
Abbreviation
Ir.
Con.
Cu.
Ch.
Al.
Dummy
Material
Iron
Constantan
Copper Alloy
Chromel
Alumel
Brass
Color Code
Black
Yellow
N/A
White
Green
N/A
WIRE WELL DATA
Contact
Size
Well Inside Dia.
+.004
–.002
Well Depth
+.031
–.000
12
.125
.250
16
.094
.188
Solder Well
Barrel
Outside Dia.
.166 ±.003
+.002
.125 _–.004
RECOMMENDED WIRE
I Chromel - Alumel
Use wire in accordance
with MIL-W-5848
II Iron - Constantan
Use wire in accordance
with MIL-W-5845
49