PI331MC-DR Datasheet, PDF (7/9 Pages) AMI SEMICONDUCTOR – 300DPI CIS Two Level Digital Output Module

Signal delay time
tdl
50
ns
Signal settling time tsh
120
ns
Digital Signal Delay tddl
60
ns
Digital Signal Off
tdodl
300
ns
Delay
Table 5 Absolute Maximum Rating:
Parameter
Power supply voltage
Input clock pulse (high level)
Input clock pulse (low level)
Symbols
Vdd
Idd
Vn
In
VLED
ILED
Vih
Vil
Maximum
Rating
10
50
-15
30
6.0
250
Vdd – 0.5
-0.8
Units
V
mA
V
mA
V
mA
V
V
Note: These are absolute maximum parameters and should not be used in operation.
Table 6 Operating Environment
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Top
Hop
Tstg
Hstg
0 to 50
0_C
10 to 85
%
-25 to+75
0_C
5 to 95
%
Setup and Adjustments
The Clock Rate and Integration Time:
This was factory set to a specific application. See note 1 under Table 2, Electro-optical
characteristics at 25° C.
The clock frequency was set to 2.0MHz.
The total integration time was set to 600 µsec.
The Required Power.
The required power is slightly greater than the specified values in Table 3.
Circuit Power:
Positive Supply:
Negative Supply:
LED Power:
+5 Volts @ 25 mA
-10 Volts @ 15 mA
+5 Volts @ 180 mA
PAGE 7 OF 9 - PI331MC-DR, 11-8-00