|
PI331MC-DR Datasheet, PDF (1/9 Pages) AMI SEMICONDUCTOR – 300DPI CIS Two Level Digital Output Module | |||
|
⢠Peripheral
Imaging
Corporation
PI331MC-DR
300DPI CIS Two Level Digital Output Module
Engineering Data Sheet
Key Features
⢠Light source, lens, and sensor are integrated into a single module
⢠11.8 dpm resolution, 89 mm scanning length
⢠Up to 600 µsec/line scanning speed, with 2 MHz pixel rate (See Table 3, Note 3.) (Other
speeds are also available)
⢠Wide dynamic range
⢠Two-Level Tracking Digital Output (âDynamic Threshold Digitizerâ)
⢠Red light source 660nm (Other colors are available)
⢠Compact size â
13 mm x 25.6 mm x 102 mm
⢠Low power
⢠Light weight
General Description
The PI331MC-DR is a contact image sensor, CIS, module with an additional on board
circuit that digitizes the analog pixels from the CIS image sensor to a âbackground-
trackingâ, two-level digital output signals. It is based on CIS module, the PI305M-A6
manufactured by PIC, but with a shorter read length of 89 mm. Hence, its performance is
equivalent to the PI305M-A6 that uses MOS image sensor technology to gains its high-
speed performance and high sensitivity. The PI331MC-DR is suitable for scanning
documents with width of 89 mm and with resolution of 11.8 dots per millimeter. Its has a
broad applications, but specially designed for the following areas:
⢠Where data compression is required, such as in data transmissions.
PAGE 1 OF 9 - PI331MC-DR, 11-8-00
|
▷ |