PI0512WS Datasheet, PDF (7/8 Pages) AMI SEMICONDUCTOR – 512-Pixel 50-mm-Pitch Wide Aperture Spectroscopic Photodiode Array

Recommended Operating Conditions at Room Temperature
Table 3 lists the recommended operational conditions.
Table 3. Recommended operating conditions at room temperature.
Parameters
Power supply
Input clock pulses high level ¹
Input clock pulse low level ¹
Video output bias levels (dark)
Clock frequency ²
Clock pulse duty cycle
Integration time ³
Symbol
VDD
Vih
Vil
Vbias
Fclk
Tint
Min.
4.5
VDD – 0.8
0.0
0.0
20
0.52
Typical
5.0
VDD
0.0
0.5
100
50
Max.
5.0
VDD
0.8
2.5
1000
80
600
Units
Volts
Volts
Volts
Volts
kHz
%
ms
Notes:
(1) Applies to all control-clock inputs.
(2) The minimum clock frequency must be consistent with the integration time as indicated in note (3).
(3) Integration time is specified at room temperature such that the maximum dark current charge build
up in each pixel is less than 10% of the typical saturation charge. Accordingly, it can be as short as
0.52 ms or as long as 0.6 seconds at room temperatur.e Longer integration times are possible by
cooling the device.
Package Dimensions
Note: Dimensions are in inches except where millimeters (mm) are indicated.
PI0512WS Page 7 of 8 – July 26, 2001