AMIS-39100 Datasheet, PDF (5/16 Pages) AMI SEMICONDUCTOR – Octal High Side Driver with Protection

AMIS-39100: Octal High Side Driver with Protection
Data Sheet
8.0 Electrical and Environmental Ratings
8.1 Absolute Maximum Ratings
Stress levels above those listed in this paragraph may cause immediate and permanent device failure. It is not recommended that
more than one of these conditions be applied simultaneously.
Table 3: Absolute Maximum Ratings
Symbol
Description
Min.
VDDN
Power supply voltage
GND - 0.3
VB
DC battery supply on pins VB1 to VB4 load dump,
Pulse 5b 400ms
GND - 0.3
Iout_ON
Maximum output current OUTx pins⁽¹⁾
The HS driver is switched on
-3000
Iout_OFF
Maximum output current OUTx pins⁽¹⁾
The HS driver is switched off
-350
I_OUT_VB Maximum output current VB1, 2, 3, 4 pins
-700
Vcapa1
DC voltage on pins capa1
0
Vdig_in
V_ESD
V_ESD
Tj
Voltage on digital inputs CLK, PDB, WR, DIN
Pins that connect the application (pins VB1..4 and Out1..8)⁽²⁾
All other pins⁽²⁾
ESD according charged device model⁽³⁾
Junction temperature (T<100 hours)
-0.3
-4
-2
-750
-40
Tmr
Ambient temperature under bias
-40
Notes:
(1)
(2)
(3)
The power dissipation of the chip must be limited not to exceed the maximum junction temperature Tj.
According to HBM standard MIL-STD-883 method 3015.7
According to norm EOS/ESD-STM5.3.1-1999 robotic mode
Max.
Unit
6
V
35
V
350
mA
350
mA
3750
mA
VB+16.5
V
VDDN+0.3
V
+4
kV
+2
kV
+750
V
175
°C
105
°C
AMI Semiconductor – Jan. 07, M-20557-002
5
www.amis.com