AMIS-710401 Datasheet, PDF (3/9 Pages) AMI SEMICONDUCTOR – 400dpi CIS Module

AMIS710401-A4: 400dpi CIS Module
Red 600nm LED Light Source
Data Sheet
4.0 Connector Pin Out
Inputs and outputs to the module are accomplished via a 10-pin connector, part number JAE IL-Z-10P-S125L3-E, located on one end of
the module.
Table 1 lists the connector pin out with its symbols and descriptions.
Table 1: Pin Out Configuration
Connector Pin Number
1
2
3
4
5
6
7
8
9
10
Symbol
VOUT
GND
VDD (+5V)
VN (-5V to -12V)
GND
SP (START)
GND
CP (CLOCK)
GLED
VLED
Description
Analog video output
Ground, 0V
Power supply
Negative power supply
Ground, 0V
Shift register start pulse
Ground
Clock pulse
Ground for the light source, 0V
Power supply for the light source
Table 2 shows the absolute maximum ratings for the parameters. Table 3 shows the absolute maximum for the LED light source. These
are the absolute maximum ratings and continuous operation is not recommended.
5.0 Absolute Maximum Rating
Table 2: Absolute Maximum Ratings
Parameter
Power supply
Input clock pulse (high level)
Input clock pulse (low level)
Symbol
Vdd
Idd
Vn
In
Vih
Vil
Max. Rating
7
100
|-15|
10
Vdd - 0.5V
|-0.5|
Units
V
mA
V
mA
V
V
Table 3: LED Absolute Maximum Ratings
Parameter
Max. Rating
AMIS-710401-A4 660nm Red LED
VLED
5.5
ILED
0.7
6.0 Environmental Specifications
Table 4 lists the environmental conditions for the modules.
Table 4: Operating and Storage Environment
Parameter
Max. Rating
Operating temperature
0 to +50
Operating humidity
10 to 90
Storage temperature
-20 to +75
Storage humidity
10 to 90
Units
°_C
%
°_C
%
Units
V
A
AMI Semiconductor – Jun. 06, M-20589-001
3
www.amis.com