AMIS-710205 Datasheet, PDF (3/9 Pages) AMI SEMICONDUCTOR – 200dpi CIS Modules

AMIS-710205-A4/AMIS-710206-A4: 200dpi CIS Modules
Data Sheet
4.0 I/O Designation
I/O to the module is a 12-pin connector located on one end of the module (see Figure 5). Table 1 lists the pin numbers and their
designations for the I/O connector. It is an ECE manufacturer EBW-PK23-P012L2-3Z connector.
Table 1: Pin Configuration
Pin Number
1
2
3
4
5
6
7
8
9
10
11
12
Symbol
VOUT1
VOUT2
GND
VOUT3
VOUT4
Vdd
SP (START)
GND
CP (CLOCK)
Vn
GLED
VLED
Names and Functions
Analog video output 1
Analog video output 2
Ground; 0V
Analog video output 3
Analog video output 4
Positive power supply
Shift register start pulse
Ground; 0V
Sampling clock pulse
Negative power supply
Ground for the light source; 0V
Supply for the light source
5.0 Module vs. LED Light Source
Table 2 lists the module's model and its corresponding LED light source.
Table 2: Module vs. LED Light Source
Module
AMIS-710205-A4
AMIS-710206-A4
LED Light Source
880nm IR SMD LED bar
630nm Red SMD LED bar
6.0 Absolute Maximum Rating
Table 3 shows the absolute maximum ratings. The parameters are common to all the modules. Table 4 shows the absolute maximum
ratings that are different among the three modules.
Table 3: Electrical Absolute Maximum Rating
Parameter
Symbols
Maximum Rating
Power supply
Vdd
7
Idd
100
Vn
-15
In
35
Input clock pulse (high level)
Vih
Vdd – 0.5V
Input clock pulse (low level)
Vil
-0.5
Note: These parameters are absolute maximums. Do not operate under these conditions.
Units
V
ma
V
ma
V
V
Table 4: LED Power Absolute Maximum Rating
Parameter
Symbols
Maximum Rating
Power supply: LED light source
Module
AMIS-710205-A4
AMIS-710206-A4
VLED
6.0
6.0
ILED
0.6
0.6
Note: These parameters are absolute maximums. Do not operate under these conditions.
Units
V
A
AMI Semiconductor – Aug. 06, M-20608-001
3
www.amis.com