AMIS-40616 Datasheet, PDF (2/17 Pages) AMI SEMICONDUCTOR – LIN Transceiver with 5V Voltage Regulator

AMIS-40616
LIN Transceiver with 5V Voltage Regulator
3.0 Ordering Information
Table 1: Ordering Information
Marketing Name
AMIS40616 AGA
Package
SOIC 150 14 GREEN (JEDEC MS-012)
Data Sheet
Temperature Range
-40°C…105°C
4.0 Key Technical Characteristics
Table 2: Key Technical Characteristics
Symbol
Parameter
Min.
Typ.
Max.
Unit
Vbb
Nominal battery operating voltage
Vbb
Load dump protection ⁽¹⁾
6
12
26
V
45
V
Ibb_SLP
Supply current in sleep mode
20
µA
Vcc_out⁽⁵⁾
Iout_max
V_wake
Tj
Regulated V_cc output in normal mode, V_cc load 1mA-30mA
Regulated V_cc output in normal mode, V_cc load 0mA-50mA
Regulated V_cc output in standby mode, V_cc load 0mA-50mA
Maximum continuous V_cc output current ⁽²⁾
Maximum V_cc output current, thermal shutdown can occur⁽²⁾
Operating DC voltage on WAKE pin
Maximum rating voltage on WAKE pin
Junction thermal shutdown temperature
4.9
5.0
4.83
5.0
4.8
5.0
30
50
0
-45
165
5.1
V
5.17
V
5.2
V
mA
mA
V_bb
V
V_bb + 0.3
V
195
°C
Tamb
Vesd
Operating ambient temperature
-40
Electrostatic discharge voltage (LIN, INH, WAKE, VBB) System HBM ⁽³⁾
-8
Electrostatic discharge voltage (LIN, INH, WAKE, VBB) HBM ⁽⁴⁾
-4
Electrostatic discharge voltage (other pins) HBM ⁽⁴⁾
-2
+105
°C
+8
kV
+4
kV
+2
kV
Notes:
1. The applied transients shall be in accordance with ISO 7637 part 1, test pulse 5. The device complies with functional class C; class A can be reached
depending on the application and external components.
2. Current limitation is set above 50mA but thermal shutdown can occur for currents above 30mA.
3. Equivalent to discharging a 150pF capacitor through a 330Ω resistor conform to IEC Standard 1000-4-2. The specified values are a target to be verified on
first prototypes. Based on the evaluation results, additional external protection components might be recommended to reach the specified system ESD
levels.
4. Equivalent to discharging a 100pF capacitor through a 1.5kΩ resistor conform to MIL STD 883 method 3015.7.
5. Vcc voltage must be properly stabilized by external capacitors: capacitor of min. 80nF with ESR<10mΩ in parallel with a capacitor of min. 8µF, ESR<1Ω.
AMI Semiconductor – January 2007, M-20545-001
2
www.amis.com